Titanate, tris -, barium

The most significant commercial product is barium titanate, BaTiO, used to produce the ceramic capacitors found in almost all electronic products. As electronic circuitry has been rniniaturized, demand has increased for capacitors that can store a high amount of charge in a relatively small volume. This demand led to the development of highly efficient multilayer ceramic capacitors. In these devices, several layers of ceramic, from 25—50 ]lni in thickness, are separated by even thinner layers of electrode metal. Each layer must be dense, free of pin-holes and flaws, and ideally consist of several uniform grains of fired ceramic. Manufacturers are trying to reduce the layer thickness to 10—12 ]lni. Conventionally prepared ceramic powders cannot meet the rigorous demands of these appHcations, therefore an emphasis has been placed on production of advanced powders by hydrothermal synthesis and other methods. 

Barium iodate 1-hydrate, synthesis 4 Indium(I) bromide, synthesis 6 Hexachlorodisiloxane, synthesis 7 Trichlorosilanethiol, synthesis 8 Tris(acetylacetonato)silicon chloride, synthesis 9 Titanium(III)chloride, synthesis 11 Bis[tris(acetylacetonato)titanium(IV)] hexachloro-titanate(IV), synthesis 12 Zirconium(IV) iodide, synthesis 13 (Triphenyl) aminophosphonium chloride, synthesis 19 (Dimethylamido)phosphoryl dichloride, synthesis 20 Bis(dimethylamido)phosphoryl chloride, synthesis 21 Trimeric and tetrameric phosphonitrilic bromides, synthesis 23 Phosphorus(V) chloride-boron trichloride complex, synthesis 24... 

---