Thinning machines

Excess buds or blossom clusters are removed before flowering using the thinning machine. In this way the strain on the trees is reduced at an early stage (breaking the biennial bearing cycle). 

TIME WHEN THE THINNING MACHINE SHOULD BE USED. Green bud-red bud stage later treatments lead to damage to fruit, while earlier treatments lead to increased damage to the wood and often do not have sufficient effect. 

Figure 10.6 (a) Reflection-absorbance spectrum of a thin machine-oil film on a chromium... 

Elastohydrodynamic Lubrication (EHL). Lubrication needs in many machines ate minimized by carrying the load on concentrated contacts in ball and toUet beatings, gear teeth, cams, and some friction drives. With the load concentrated on a small elastically deformed area, these EHL contacts ate commonly characterized by a very thin separating hydrodynamic oil film which supports local stresses that tax the fatigue strength of the strongest steels. 

Fig. 10. Schematic of casting machine used to make microporous membranes by watervapor imbibition. A casting solution is deposited as a thin film on a moving stainless steel belt. The film passes through a series of humid and dry chambers, where the solvent evaporates from the solution, and water vapor is absorbed from the air. This precipitates the polymer, forming a microporous membrane that is taken up on a collection roU (25).

As with ah thin-film PV technologies, the projected manufacturing costs of a-Si H ahoy PV modules fah rapidly with annual manufacturing volume, ie, MWp /yr. The primary driver of this volume cost reduction is the volume—cost relationship of commercially available thin-film processing equipment. Thin-film coating machines often have capacities equivalent to 3—5 yr, so that manufacturing economies of scale are more fully realized at the... 

Gas impingement from slots, orifices, and nozzles at 10—100 m/s velocities is used for drying sheets, films, coatings (qv), and thin slabs, and as a secondary heat source on dmm dryers and paper (qv) machine cans. The general relationship for convection heat transfer is (13,14) ... 

---