Thermogravimetric analysi

In a thermogravimetric analysis, the sample is placed in a small weighing boat attached to one arm of a specially designed electromagnetic balance and placed inside an electric furnace. The temperature of the electric furnace is slowly increased at a fixed rate of a few degrees per minute, and the sample s weight is monitored. 

The process known as transimidization has been employed to functionalize polyimide oligomers, which were subsequentiy used to produce polyimide—titania hybrids (59). This technique resulted in the successhil synthesis of transparent hybrids composed of 18, 37, and 54% titania. The effect of metal alkoxide quantity, as well as the oligomer molecular weight and cure temperature, were evaluated using differential scanning calorimetry (dsc), thermogravimetric analysis (tga) and saxs. 

The definition of polymer thermal stabiUty is not simple owing to the number of measurement techniques, desired properties, and factors that affect each (time, heating rate, atmosphere, etc). The easiest evaluation of thermal stabiUty is by the temperature at which a certain weight loss occurs as observed by thermogravimetric analysis (tga). Early work assigned a 7% loss as the point of stabiUty more recentiy a 10% value or the extrapolated break in the tga curve has been used. A more reaUstic view is to compare weight loss vs time at constant temperature, and better yet is to evaluate property retention time at temperature one set of criteria has been 177°C for 30,000 h, or 240°C for 1000 h, or 538°C for 1 h, or 816°C for 5 min (1). 

T and by dsc, (onset of decomposition) Thermogravimetric analysis ia argon at 10°C heating rate. 

Mixtures can be identified with the help of computer software that subtracts the spectra of pure compounds from that of the sample. For complex mixtures, fractionation may be needed as part of the analysis. Commercial instmments are available that combine ftir, as a detector, with a separation technique such as gas chromatography (gc), high performance Hquid chromatography (hplc), or supercritical fluid chromatography (96,97). Instmments such as gc/ftir are often termed hyphenated instmments (98). Pyrolyzer (99) and thermogravimetric analysis (tga) instmmentation can also be combined with ftir for monitoring pyrolysis and oxidation processes (100) (see Analytical methods, hyphenated instruments). 

Fig. 8. Thermogravimetric analysis of polymers and copolymers of styrene in nitrogen at 10°C/min A represents PS B, poly(vinyltoluene) C, poly(a-methylstyrene) D, poly(styrene-i (9-acrylonitrile), with 71.5% styrene E, poly(styrene-i (9-butadiene), with 80% styrene and F,...

Fig. 11. Thermogravimetric analysis of cellulose triacetate. Method 20°C/min to 700°C, in (N2) at 40 mL/rnin purging rate.

Thermal analysis using differential scanning calorimetry (dsc), thermogravimetric analysis (tga), and differential thermal analysis (dta) can provide useful information about organic burnout, dehydration, and decomposition. 

Thermogravimetric analysis (TGA) Onset temperature of weight loss... 

Homma, H., Kuroyagi, T., Izumi, K., Mirley, C.L., Ronzello, J. and Boggs, S.A., Evaluation of surface degradation of silicone rubber using thermogravimetric analysis, Proc. Int. Symp. Electr. Insul. Mater., 2nd. 1998, 1, pp. 631-634. 

This phenomenon can be demonstrated by both measuring the changes of the thermal properties of the ECA homopolymer and in adhesion tests. The addition of only 1 wt.% of 9 to a sample of the ECA homopolymer significantly increases the onset of decomposition in the thermogravimetric analysis (TGA) of the polymer, as seen in Fig. 9 [29]. 

Thermogravimetric analysis and other studies made on low-molecular weight model compounds such as 1,3, 5,-trichlorohexane [7,8] corresponding to the idealized head-to-tail structure of PVC show these structures to be considerably more stable than the polymer. This abnormal instability of the polymer is attributed to structural irregularities or defects in the polymer chain, which serve as initiation sites for degradation. 

The modified NBR samples were characterized by differential scanning calorimetry [11,78-80,98]. The glass-transition temperature (T ) decreased with the level of hydrogenation. In the case of HFNBR, Tg increased with an increase in the addition of aldehyde groups to the polymer chain. Thermogravimetric analysis of the modified polymers have also been carried out [15]. 

C Duval Inorganic Thermogravimetric Analysis, Elsevier, Amsterdam, 1963... 

Thermogravimetric analysis has also been used in conjunction with other techniques, such as differential thermal analysis (DTA), gas chromatography, and mass spectrometry, for the study and characterisation of complex materials such as clays, soils and polymers.35... 

Thermogravimetric analysis (TGA) 97 Three-phase fluidization studies. . 156... 

It is of interest that thermogravimetric analysis has been used as a means of determining end group purity of PM VIA macromonomers formed by catalytic chain transfer. 

David, The Application of Differential Thermal And Thermogravimetric Analysis to Military High Explosives , NAVORD 5802, AD 232625 (i960) 108) P. Aubertein H. Pascal, Chemical Determination of Some Explosives and Explosive Mixtures , MP 40,113-25 (1958) CA 54, 25825 (1960) 109) E.M. Bens et al, Rapid... 

---