Tetrabutylammonium cyanoborohydride

Replacement of hydrogen by alkyl groups gives compounds like lithium triethylborohydride (Super-Hydride ) [100], lithium tris sec-butyl)borohydride [101] (L-Selectride ) and potassium tris sec-butyl)borohydride (K-Selectride ) [702], Replacement by a cyano group yields sodium cyanoborohydride [103], a compound stable even at low pH (down to 3), and tetrabutylammonium cyanoborohydride [93],... 

Chemical reduction of aromatic aldehydes to alcohols was accomplished with lithium aluminum hydride [5i], alane [770], lithium borohydride [750], sodium borohydride [757], sodium trimethoxyborohydride [99], tetrabutylam-monium borohydride [777], tetrabutylammonium cyanoborohydride [757], B-3-pinanyl-9-borabicyclo[3.3.1]nonane [709], tributylstannane [756], diphenylstan-nane [114], sodium dithionite [262], isopropyl alcohol [755], formaldehyde (crossed Cannizzaro reaction) [i7i] and others. 

As mentioned in the introduction, one of the major advantages of using transition metals for dearomatization is that they allow the isolation of reaction intermediates and, consequently, broaden the range of accessible manipulations. For example, when the naphthalene complex of [Os] (3) is treated with dimethoxymethane in the presence of HOTf, the resulting 3-lH-naphthalenium species 23 can be isolated in 88 % yield and stored for days at room temperature (Table 5). The electrophile adds anti to the face involved in metal coordination and pushes the proton at Cl toward the metal, which prevents spontaneous rear-omatization. As shown in Table 5, 23 reacts with MMTP, the conjugate base of dimethyl malonate, 2-trimethylsiloxypropene, tetrabutylammonium cyanoborohydride (TBAC), dime-... 

Sodium cyanoborohydride (NaBHsCN) or tetrabutylammonium cyanoborohydride in acidic methanol or acidic HMPA reduces a,p-unsaturated aldehydes and ketones to the corresponding allylic alcohols. This system is limited to enones in which the double bond is not further conjugated, in which case the allylic hydrocarbon is formed in substantial amounts. Thus, reduction of chalcone gives mainly 1,3-di-phenylpropene (48%) as well as 26% of the allylic ether. Cyclic enones are also not good substrates, as competing 1,4-addition gives large fractions of saturated alcohols. ... 

Cyanoborohydride and its modified reagents have been used for reductive dehalogenations. Thus, the combination of sodium or tetrabutylammonium cyanoborohydride, sodium or potassium 9-cyano-9-hydro-9-borabicyclo[3.3.1]nonanate [9-BBNCN] (2) or polymeric cyanoborane (3) in HMPA furnishes an efficient and mild system for the reduction of alkyl halides. The reagents are selective in that other functional groups, including ester, carboxylic acid, amide, cyano, alkene, nitro, sulfone, ketone, aldehyde and epoxide, are essentially inert under the reduction conditions thus, the reduction procedure is attractive for synthetic schemes which demand minimum damage to sensitive portions of the molecule. 

The Na and tetrabutylammonium cyanoborohydrides [BK5, HNl, LI, PSl, W3] are soluble in water, alcohols, organic acids, THF, and polar aprotic solvents. They are... 

Tetrabutylammonium cyanoborohydride has also been used under noncataly tic conditions [ 13]. Inhexamethylphosphoric triamide (HMPA, HMPT), (n-C4H9)4N BH3CN reduces primary alkyl iodides to alkanes in high yield. Primary alkyl bromides are about half as reactive as the iodides and primary chlorides and tosylates are virtually inert, as are the cyano, nitro and carbonyl groups. 

The reducing power of this system is enhanced by the addition of acid. In the presence of 0.15 N sulfuric acid, aldehydes are rapidly reduced. If the concentration of acid is increased to 1.5 N, ketones are rapidly reduced. The addition of acid appears to have no influence on the halide reduction reaction. In Table 12.3 are recorded several applications of tetrabutylammonium cyanoborohydride as a reducing agent. 

Transformation of ketones to alcohols has been accomplished by many hydrides and complex hydrides by lithium aluminum hydride [55], by magnesium aluminum hydride [89], by lithium tris tert-butoxy)aluminum hydride [575], by dichloroalane prepared from lithium aluminum hydride and aluminum chloride [816], by lithium borohydride [750], by lithium triethylboro-hydride [100], by sodium borohydride [751,817], by sodium trimethoxyborohy-dride [99], by tetrabutylammonium borohydride [771] and cyanoborohydride [757], by chiral diisopinocampheylborane (yields 72-78%, optical purity 13-37%) [575], by dibutyl- and diphenylstannane [114], tributylstanrume [756] and others Procedure 21, p. 209). 

---