Sulfonated Diels-Alder

Sulfonated Diels-Alder poly(phenylene) (SDAPP). 

Stanis RJ, Yaklin MA, Cornelius CJ, Takatera T, Umemoto A, Ambrosini A, Fujimoto CH (2010) Evaluation of hydrogen and methanol fuel cell performance of sulfonated diels alder polyfphenylene) membranes. J Power Sources 195 104-110... 

FIGURE 6.19 DMFC performance of DA-SPPs and Nafion (80°C, 200 seem of air fed to the cathode at 15 psig backpressure 1 mL min methanol fed to anode at 0 psig backpressure 1 M left, 3 M right.). (Reprinted from J. Power Sources, 195, Stanis, R. J., Yaklin, M.A., Cornelius, C.J., Takatera, T., Umemoto, A., Ambrosini, A., and Fujimoto, C.H., Evaluation of hydrogen and methanol fuel cell performance of sulfonated Diels Alder poly(phenylene) membranes, 104-110, Copyright (2010), with permission from Elsevier.)... 

FIGURE 6.20 Charge-discharge curves of the SDAPP membranes. (Reprinted from Electrochem. Commun., 20, Fujimoto, C., Kim, S., Stains, R., Wei, X., Li, L., and Yang, Z.G., Vanadium redox flow battery efficiency and durability studies of sulfonated Diels Alder poly(phenylene)s, 48-51, Copyright (2012), with permission from Elsevier.)... 

Oxidation of thiophene with peracid under carefully controlled conditions gives a mixture of thiophene sulfoxide and 2-hydroxythiophene sulfoxide. These compounds are trapped by addition to benzoquinone to give ultimately naphthoquinone (225) and its 5-hydroxy derivative (226) (76ACS(B)353). The further oxidation of the sulfoxide yields the sulfone, which may function as a diene or dienophile in the Diels-Alder reaction (Scheme 88). An azulene synthesis involves the addition of 6-(A,A-dimethylamino)fulvene (227) to a thiophene sulfone (77TL639, 77JA4199). 

Diels-Alder cycloaddition reactions, 2, 350 tautomerism, 2, 27, 152, 347 Isoquinoline, 4-hydroxy-alkylation, 2, 349 sulfonation, 2, 321... 

The following compounds have been obtained from thiete 1,1-dioxide Substituted cycloheptatrienes, benzyl o-toluenethiosulfinate, pyrazoles, - naphthothiete 1,1-dioxides, and 3-subst1tuted thietane 1,1-dioxides.It is a dienophile in Diels-Alder reactions and undergoes cycloadditions with enamines, dienamines, and ynamines. Thiete 1,1-dioxide is a source of the novel intermediate, vinylsulfene (CH2=CHCH=SQ2). which undergoes cyclo-additions to strained olefinic double bonds, reacts with phenol to give allyl sulfonate derivatives or cyclizes unimolecularly to give an unsaturated sultene. - Platinum and iron complexes of thiete 1,1-dioxide have been reported. 

Other methods for the preparation of cyclohexanecarboxaldehyde include the catalytic hydrogenation of 3-cyclohexene-1-carboxaldehyde, available from the Diels-Alder reaction of butadiene and acrolein, the reduction of cyclohexanecarbonyl chloride by lithium tri-tcrt-butoxy-aluminum hydride,the reduction of iV,A -dimethylcyclohexane-carboxamide with lithium diethoxyaluminum hydride, and the oxidation of the methane-sulfonate of cyclohexylmethanol with dimethyl sulfoxide. The hydrolysis, with simultaneous decarboxylation and rearrangement, of glycidic esters derived from cyclohexanone gives cyclohexanecarboxaldehyde. 

The dienamine (148) can react in two ways with methane sulfonyl chloride. In one a 1,4 Diels-Alder-type addition gives 149 in the other way the initially formed product reacts further to give the bis-cyclic sulfone (150) (102,103). 

Melles and Backer " found, from a study of the oxidation of substituted thiophenes with perbenzoic or peracetic acid, that sulfones could be obtained from polysubstituted methyl- and phenyl-thiophenes and that the presence of electron-attracting groups, such as nitro, hindered the oxidation. Oxidation of thiophene - led to a product which was formed through a Diels-Alder reaction between the intermediate thiophene sulfoxide (211) and thiophene sulfone (212) and for which two alternative structures, (213) or (214), were suggested. Similar sesquioxides were also obtained from 2- and 3-methylthiophene and 3-phenylthiophene. The structures were not proved. Bailey and Cummins synthesized thiophene-1,1-dioxide... 

Treatment of l-ethylideneamino-3-methylindole 95 with p-toluene sulfonic acid in boiling benzene gave l,2-dihydro[l,2,4]triazino[l,6-a]indole 96 (75CPB2891). The reaction was said to be due to an initial formation of a Diels-Alder-type adduct followed by the liberation of 3-methylindole. Compound % was oxidized either on exposure to air or by the action of chloranil to give 97 (Scheme 24). 

An attempted synthesis via a retro Diels-Alder route failed, due to the instability of the thiete sulfones at the temperatures required to remove the anthracene blocking group189 (equation 88). 

Based on the high dienophilicity of acyclic vinyl sulfones one should expect thiete dioxides to exhibit similar properties. Indeed, several Diels-Alder (2 +4) cycloadditions with thiete dioxide as dienophile are known. For example, 1,3-butadiene and 1,3-diphenylisobenzofuran react with 3-chloro- or 3-bromo-thiete dioxides to afford the corresponding 1 1 Diels-Alder cycloadducts255 277 (equation 105). 

A chirality transfer from the allenic sulfone 154 to the Diels-Alder adducts is observed in the reaction of (+)-(S)-l-(p-tolylsulfonyl)buta-l,2-diene with cyclopentadiene (equation 112), in which the diastereomers 155 and 156 are formed predominantly107. 

A highly efficient construction of the steroidal skeleton 166 is reported by Kametani and coworkers111 in the intramolecular Diels-Alder reaction of the a, jS-unsaturated sulfone moiety of 165 (equation 117). Thus, when the sulfone 165 is heated in 1,2-dichlorobenzene for 6h, the steroidal compound 166 can be obtained in 62% yield. The compound 166 produces estrone (167) by elimination of benzenesulfinic acid and subsequent hydrogenation of the formed double bond. The stereoselectivity of the addition reflects a transition state in which the p-tosyl group occupies the exo position to minimize the steric repulsion between methyl and t-butoxy groups and the o-quinodimethane group as shown in equation 117. 

Thiophene 1,1-dioxide (61) is too unstable to isolate and dimerizes with loss of S02 to give 3a, 7a-dihydrobenzothiophene 1,1-dioxide (172) in 34%113. However, alkyl-substituted thiophene 1,1-dioxides can serve as dienes in the Diels-Alder reaction, since the aromatic properties of the thiophene nucleus are lost completely and the n-electrons of the sulfur atom are used for forming the bond with oxygen. The sulfones 173-178 are found to react with two moles of maleic anhydride at elevated temperature to give bicyclic anhydrides114. Thus, at high reaction temperature, S02 is split off to give cyclohexadiene... 

Other examples that involve intermediate allyl cations are illustrated in Scheme 1.4. The cationic palladium(II) complex [Pd(dppp)(PhCN)2](BF4)2 coordinates the carbonyl oxygen of benzaldehyde and the activated carbonyl carbon attacks the isoprene, forming the allyl cation 10 which then cyclizes to give the 4-methyl-6-phenyl-5,6-dihydro-2H-pyran [22]. 2-Oxopropyl acrylate 11, in the presence of trimethylsilyltrifluoromethane sulfonate (TMSOTf) and methoxytrimethylsilane (MeOSMT), generates the cation 11a which is an efficient dienophile that reacts easily with the cyclohexadiene to give the Diels-Alder adduct in good yield [23]. 

Bis-o-quinodimethanes have also been used to functionalize [60]-fullerene by Diels Alder reaction. An example is the preparation of main-chain polymers with incorporated [60]-fullerene units [48] illustrated in Scheme 2.20. Cycloaddition of bis-diene 50 generated in situ from bis-sulfone 49 with [60]-fullerene leads to an oligomer mixture 51. Another type of functionalization is based on the... 

Different results were obtained by Kobayashi and colleagues [76] performing the Diels-Alder reaction of 2,3-dimethyl butadiene with N-butylmaleimide in water in the presence of various dodecyl sulfate (DS) and dodecane sulfonate (DCS) LASCs [M(DS) M = Sc, Cu n = 3, 2 M(DCS) M = Sc, Yb, Mn, Co, Cu, Zn, Na, Ag n = 3,2, 1]. Unexpectedly, no acceleration was observed with respect to the reactions carried out in water only, and no catalytic effect was found also by using a bidentate dienophile which, in principle, should be able to coordinate the metal cation in the LASC system. 

Nafion-H (144), a perfluorinated resin-sulfonic acid, is an efficient Bronsted-acid catalyst which has two advantages it requires only catalytic amounts since it forms reversible complexes, and it avoids the destruction and separation of the catalyst upon completion of the reaction [94], Thus in the presence of Nafion-H, 1,4-benzoquinone and isoprene give the Diels-Alder adduct in 80% yield at 25 °C, and 1,3-cyclohexadiene reacts with acrolein at 25 °C affording 88 % of cycloadduct after 40 h, while the uncatalyzed reactions give very low yields after boiling for 1 h or at 100 °C for 3.5 h respectively [95], Other examples are given in Table 4.24. In the acid-catalyzed reactions that use highly reactive dienes such as isoprene and 2,3-dimethylbutadiene, polymerization of alkenes usually occurs with Nafion-H, no polymerization was observed. 

The aqueous aza-Diels-Alder reaction of an aldehyde and an amine hydrochloride with a diene is catalyzed by lanthanide(III) trifluoromethane sulfonates (Ln(OTf)3, triflates [24]). Some examples are reported in Schemes 6.12 and 6.13. With respect to uncatalyzed reactions, the lanthanide catalyst allows milder reaction conditions, increases the reaction yield and does not affect the diaster-eoselectivity of the reaction, but influences the regiochemistry as in the cycloaddition of 25 with 1,3-dimethyl-1,3-butadiene (Schemes 6.10 and 6.12). These results have been applied [24b-d] to the synthesis of azasugars (Scheme 6.14). 

---