Substrate/surface characterization hardness

Test methods used to determine the uniformity of substrates are numerous and vary with the type of material. They are generally the same tests used to characterize the material or to determine its fundamental physical properties. Tests that are commonly employed are hardness, tensile strength, modulus, and surface characteristics such as roughness or contact angle with a standard liquid. Often a test similar to the nonvolatile test mentioned above is used to determine if there are any compounds in the substrate that are capable of out-gassing on exposure to elevated temperatures. Moisture content of certain hydroscopic polymers, such as nylon and polycarbonate, is also known to affect adhesion. 

The rate of the oxidation process is determined by the reactivity of the starting carbon and oxidizer. The greater the reactivity of the substrates the lower the temperature of the process in which uniform formation of the pores in the granules is observed. In the case of carbonaceous materials the cokes of brown coals show the greatest reactivity, and the cokes of hard coals the smallest activity. The cokes of pit coals show an intermediate reactivity. This is connected with the earlier mentioned ordering of the crystallographic structure of carbon, which is of significant importance in the case of modification of carbon deposits contained in the carbon-mineral adsorbents in which the carbonaceous compound may be characterized by a differentiated chemical and physical structure. Thus the surface properties of hydrothermally modified complex adsorbents are defined by the course of three processes ... 

---