Styrene polymers classes

Figure 2.1 Overview of the different classes of styrene polymers...

Very little is known about the structure of the cured polyester resin. The products definitely belong in the thermoset class. There is some correlation between maximum physical properties a nd a molar ratio of 1 1 between double bonds in the alkyd and monomer. However, this is not critical and simple cross-linking does not tell the full story. The styrene monomer can be present in twice the molar amount needed, and yet complete copolymerization takes place without apparent formation of styrene polymer. 

Waterborne dispersed polymers include both synthetic polymer dispersions and natural rubber. Synthetic polymer dispersions are produced by emulsion polymerization. A substantial part of the synthetic polymer dispersions is commercialized as dry products these include SBR for tires, nitrile rubbers, about 10% of the total PVC production, 75% of the total ABS and redispersable powders for construction materials. Carboxylated styrene-butadiene copolymers, acrylic and styrene-acrylic latexes and vinyl acetate homopolymer and copolymers are the main polymer classes commercialized as dispersions. The main markets for these dispersions are paints and coatings, paper coating, adhesives and carpet backing. 

Emulsion polymerization is the leading technique to produce colloidal polymer dispersions. Carboxylated styrene-butadiene copolymers, acrylic and styrene-acrylic latexes, and vinyl acetate homopolymer and copolymers are the main polymer classes produced by this technique. These products are commercialized as dispersions and as dry products. 

Metallocene catalysts have enabled the synthesis of novel polymers not possible with Ziegler-Natta catalysts (e.g. syndiotactic polystyrene, a material with a high melting point that promises to compete effectively with polyamides and other engineering thermoplastics). Dow and Idemitsu are leaders in this development. Dow has extended the styrene polymer family to a new class of ethylene styrene eopolymers with a... 

The major polymer classes - polyolefins, polyvinyl chloride and polystyrene - are defined by their monomers ethene, propene, vinyl chloride and styrene (Fig. 1-8). 

Star polymers are a class of polymers with interesting rheological and physical properties. The tetra-functionalized adamantane cores (adamantyls) have been employed as initiators in the atom transfer radical polymerization (ATRP) method applied to styrene and various acrylate monomers (see Fig. 21). 

Transition from liquid behavior to solid behavior has been reported with fine particle suspensions with increased filler content in both Newtonian and non-Newtonian liquids. Industrially important classes are rubber-modified polymer melts (small rubber particles embedded in a polymer melt), e.g. ABS (acrylo-nitrile-butadiene-styrene) or HIPS (high-impact polystyrene) and fiber-reinforced polymers. Another interesting suspension is present in plasticized polyvinylchloride (PVC) at low temperatures, when suspended PVC particles are formed in the melt [96], The transition becomes evident in the following... 

Another important class of copolymers synthesized by chain polymerisation are block (or sequenced) copolymers diblock and triblock copolymers being the most important ones. They are very useful as compatibilisers (emulsifiers) in immiscible polymer blends. Another major use is as thermoplastic elastomers. Both uses are best explained through the example of butadiene-styrene block copolymers. 

This paper will describe the ways in which the present needs in tire rubbers can be met by preparing butadiene-styrene solution polymers of controlled structure. This appears especially realizable today, as a result of two new classes of organo-alkaline earth polymerization initiators,... 

---