Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Splash resistance

The recommended location for the diesel fuel tank is outdoors, just outside of the building. Where location of the diesel fuel storage tank outside of the fire water pump building is not appropriate (cold weather), sprinkler protection of the fire-water pump house is recommended. Pump controllers should be sealed and splash resistant. [Pg.180]

One way to solve this problem, and thereby control emissions directly from the start, is to use a sensor based on a material more resistant to thermal shock as a cold-start sensor [128]. SiC, as the second hardest material in existence only surpassed by diamond, is such a material and has therefore been tested for its suitability as a cold-start sensor. The water-splash resistance of SiC is still not verified because these experiments are complicated to perform in a laboratory engine test bench. [Pg.60]

Level B is used when the highest level of respiratory protection is required, but skin and eye protection will suffice with splash resistant gear. The equipment includes SCBA and splash resistant clothing, hood, gloves, hardhat, boots, booties, and two-way communication and cooling system. [Pg.508]

PERSONAL PROTECTION Wear solvent-resistant gloves and clothing Teflon is recommended as a protective material wear splash resistant goggles enclose operations and use local exhaust ventilation at site of chemical release use a NIOSH approved full facepiece respirator with an organic cartridge where the potential exists for exposure over 10 ppm where the potential for high exposure exists, use self-contained breathing apparatus. [Pg.6]

PERSONAL PROTECTION wear chemical protective clothing which is specifically recommended by the manufacturer wear dust- and splash-resistant safety goggles wear positive pressure self-contained breathing apparatus. [Pg.17]

Nomex MHP fabrics are claimed to offer inherent, mnltihazard protection inclnding melt splash resistance. [Pg.304]

Indirect-vent, impact and splash resistant goggles are suggested for use with plasticizers." Face shield should additionally be used when working with corrosive, highly irritating, or toxic substances in combination. [Pg.634]

Splash resistance/synthetic blood Not required Not required 120 80 120 160... [Pg.144]

I Dust and Splash Resistant J Meets ANSI Z87.1 Standards " ... [Pg.29]

See other pages where Splash resistance is mentioned: [Pg.562]    [Pg.793]    [Pg.454]    [Pg.300]    [Pg.325]    [Pg.150]    [Pg.136]    [Pg.142]    [Pg.142]    [Pg.142]    [Pg.143]    [Pg.136]    [Pg.142]    [Pg.142]    [Pg.142]    [Pg.143]    [Pg.28]   
See also in sourсe #XX -- [ Pg.316 ]

See also in sourсe #XX -- [ Pg.292 ]



SEARCH



SPLASH

Splashing

© 2024 chempedia.info