Socketing design specifications

Socketing (Thermo-Set Resin). Before proceeding with thermo-set resin socketing, the manufacturer s instructions for using this product should be carefully read. Particular attention should be given to sockets designed specifically for resin socketing. Other thermo-set resins used may have specifications that differ from those shown in this section. 

Prosthetic Prescription. The director of the prosthetic clinic (e.g., orthopedist or physiatrist) typically writes the prosthetic prescription, with input from the physical therapist and prosthetist team members. Prosthetic prescription refers to specification of the prosthetic socket design, commercial componentry (foot, knee units), suspension, and interface materials (insert, stump socks). Prosthetic selection is influenced by the age and general condition of the patient, his or her skin and vascular status, the presence or absence of disease, and any limitations imposed by such disease. 

ISO 580 1990 Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings -Oven test - Test method and basic specifications ISO 727-1 2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 1 Metric series ISO 727-2 2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 2 Inch-based series ISO 1163-1 1995 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1 Designation system and basis for specifications ISO 1163-2 1995 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2 Preparation of test specimens and determination of properties ISO 1265 1979 Plastics - Polyvinyl chloride resins - Determination of number of impurities and foreign particles... 

EIA-JESD-30 Descriptive Designation System for Semiconductor Device Packages EIA SP 4251 Detail Specification for Production Ball Grid Array (BGA), High Pin Count (1089 Pins and Greater) Socket for Use in Electronic Equipment... 

Each type of goggle is designed for specific hazards. Generally, goggles protect eyes, eye sockets, and the facial area immediately surrounding the eyes fiom impact, dust, and splashes. Some goggles fit over corrective lenses. (See Figure 24-3.)... 

---