Small particle liquid chromatography plate numbers

An alternative strategy for fast liquid chromatography uses short columns packed with small particles operated at high flow rates and often elevated temperatures to separate simple mixtures under conditions were resolution is compromised but still adequate for identification purposes [252-258]. Small diameter particles provide larger plate numbers by virtue of their relatively small interparticle mass transfer resistance combined with a shallow increase in the reduced plate height as the reduced mobile... 

Modern high-performance liquid chromatography has been developed to a very high level of performance by the introduction of selective stationary phases of small particle sizes, resulting in efficient columns with large plate numbers per litre. 

There is much interest in high-efficiency- and high-speed separation media for liquid chromatography. The plate numbers available in practice have been in the range of 10,000-30,000 in HPLC for 20 years or so, but these are low compared to well over 100,000 theoretical plates in capillary gas chromatography or in capillary electrophoresis. This is caused by the limitation in the use of small-sized particles for HPLC, where a particle-packed column is commonly used under a pressure-drop of up to 40 MPa. An increase in column efficiency by using small particles, which is the approach taken in the past, is accompanied by an increase in the pressure-drop, as expected from Eqns. 5.2 and 5.3, below. Eqns. 5.1-3 describe the efficiency (plate height) and flow resistance of a column packed with particles [1-3], where N stands for the... 

---