Shredder light fractions

From the description above it already can be deduced that this plant can deal with a lot of waste types and hence is rather robust in terms of acceptance criteria. S VZ has experience with treating mixed plastics waste, waste derived fuel (a mixture of plastics, wood and paper), the shredder light fraction of car wrecks, and the plastic fraction from shredded white goods and electronics. SVZ can handle on average 2% chlorine in MPW, with short-term excursions to 6%. The overall chlorine content has to be controlled by a right blend with other waste types. SVZ does not favour a high... 

KWU Municipal waste Shredder light fractions 9 sites in Japan... 

For shredder light fractions, a mixture of polyolefins and polyurethanes containing as well as polyamides, PVC, polystyrene and blends, Wanzl et al. [23, 24] and Basel [25] have shown for the treatment of the pyrolysis gases from rotary kiln pyrolysis that by using dolomite beds at 500°C and a residence time of 20 s, chlorine content can be reduced from 1000 ppm to below the detection limit of 1 ppm. 

TREATMENT OF SHREDDER LIGHT FRACTIONS/SHREDDER RESIDUES... 

The treatment of electronic scrap is again more complicated and delicate than treating shredder residues or shredder light fractions. On one hand it is a mixture of thermoplastics and thermosettings, on the other hand it contains quite high amounts of bromine, precious metals, nonferrous metals, and useful inert materials. These two aspects are combined... 

Table 14.9 Polymer Composition of Automotive Shredder Residue Lights Fraction Col- ...

Should the panes first be removed from recycled vehicles or can they be included in the light shredder fraction ... 

---