Sessile bubble formation/detachment

In the bubble formation from an inclined surface, however, the bubble development and the bubble detachment processes are decoupled because a developing bubble could drift out of the orifice due to the component of the buoyancy parallel to the inclined surface. Once a sessile bubble drift out of the orifice, the bubble development ceases because no air is fed into a sliding bubble. Since the bubble development and detachment are decoupled, the flow rate of air becomes an important factor, which controls the frequency of sliding bubble... 

There are static and dynamic methods. The static methods measure the tension of practically stationary surfaces which have been formed for an appreciable time, and depend on one of two principles. The most accurate depend on the pressure difference set up on the two sides of a curved surface possessing surface tension (Chap. I, 10), and are often only devices for the determination of hydrostatic pressure at a prescribed curvature of the liquid these include the capillary height method, with its numerous variants, the maximum bubble pressure method, the drop-weight method, and the method of sessile drops. The second principle, less accurate, but very often convenient because of its rapidity, is the formation of a film of the liquid and its extension by means of a support caused to adhere to the liquid temporarily methods in this class include the detachment of a ring or plate from the surface of any liquid, and the measurement of the tension of soap solutions by extending a film. 

---