Self-reactive liquid type

Self-Reactive Liquid Type C, temperature controlled... 

PYROPHORIC ORGANOMETALLIC COMPOUNDS, n.o.s. 3229 48 SELF-REACTIVE LIQUID TYPE F... 

ORGANOMETALLIC DISPERSION, water-reactive, flammable, n.o.s. 3235 52 temperature controlled SELF-REACTIVE LIQUID TYPE D. 

SELF-REACTIVE LIQUID TYPE C 3248 28 MEDICINES, liquid, flammable, toxic. 

SELF-REACTIVE LIQUID TYPE E 3251 32 ISOSORBIDE-5-MONONITRATE... 

B.8.2.2 Mixtures of oxidizing substances, meeting the criteria for classification as oxidizing liquids or oxidizing solids, which contain 5% or more of combustible organic substances and which do not meet the criteria mentioned in B.8.2.1 (a), (c), (d) or (e), shall be subjected to the self-reactive chemicals classification procedure in B.8.2.3. Such a mixture showing the properties of a self-reactive chemical type B to F shall be classified as a self-reactive chemical. 

Polymer inclusion membranes (PIMs) are a relatively novel type of self-supporting liquid membranes for the extraction and separation of metallic and non-metallic ionic species and small organic molecules from dilute aqueous solutions. PIMs entrap a solute-selective extraction reagent, often referred to as the carrier, in a base polymer matrix, which consists of a base polymer and in some cases may contain plasticizers and chemical modifiers. When the PIM is placed in contact with the dilute aqueous solution, the extractant reactively couples with the solute of interest and transfers it into or through the membrane. 

Fluorinated self-assembled monolayers (F-SAM) can be deposited either in liquid phase, hy dipping the mold direcfly into a diluted solution of anti-sticking molecules [92], or in a vapor phase process. The latter can he done either by thermal evaporation of the liquid precursor at atmospheric pressure [93] or by vacuum evaporation at room temperature [94]. Chlorosilane molecules are very reactive and able to polymerize, producing particles that can precipitate onto the mold. This is why it is preferable to use the vapor phase process with this type of molecules, leading to smoother surfaces [95]. 

Self-diffusion type measurements. A radiotracer of a specific form is chemical mixed with a solid and the diffusion into the non-labelled segment of the same material is measured. The procedure yields information on matrix restriction caused by pore stmcture and water content when a non-reactive component is introduced (Na-22, Cl-38 and H-3). For reactive species it will yield information on the distribution ratio between liquid and solid phase, which can be expressed as a retardation factor. By introducing components of interest in different chemical forms the mobilities of these different species in a given matrix can be determined. Analysis of diffusion profiles may result in identification of more then one species. 

---