Safety relief valve open nozzle

Safety-Relief Valve this is an automatic pressure-relieving device actuated by the static pressure upstream of the valve and characterized by an adjustment to allow reclosure, either a pop or a non-pop action, and a nozzle type entrance and it reseats as pressure drops. It is used on steam, gas, vapor and liquid (with adjustments), and is probably the most general tyqDe of valve in petrochemical and chemical plants (Figures 7-3, 7-3A, and 7-4). Rated capacity is reached at 3% or 10% overpressure, depending upon code and/or process conditions. It is suitable for use either as a safety or a relief valve [1,10]. It opens in proportion to increase in internal pressure. 

An open nozzle can be the primary relief device and should be treated with the same respect as a safety relief valve. However, in the previous two incidents as well as this one, open vents are not always treated with the same respect as safety relief valves. No competent process foreman or chemical process operator would dream of asking a fitter to replace a relief device with a smaller one without requesting that calculations be performed. [7]... 

In the unlikely event that the RHR shutdown suction line is unavailable during reactor shutdown to cool reactor water and during the period when the LPCI function of the RHR system and/or the LPCS system pumps are injecting water into the reactor vessel, safety/relief valves used for automatic depressurization can be used to pass water from the reactor vessel to the suppression pool via valve discharge lines. For this to occur, the reactor vessel floods to a level above the vessel main steam line nozzles, selected safety/relief valves are opened from the control room to pass reactor water to the suppression pool. 

---