Rotation axis rotoinversion

Apart from the symmetry elements described in Chapter 3 and above, an additional type of rotation axis occurs in a solid that is not found in planar shapes, the inversion axis, n, (pronounced n bar ). The operation of an inversion axis consists of a rotation combined with a centre of symmetry. These axes are also called improper rotation axes, to distinguish them from the ordinary proper rotation axes described above. The symmetry operation of an improper rotation axis is that of rotoinversion. Two solid objects... 

The symbols used to indicate symmetry elements with and without translation components are given in Tables 2.4 and 2.5. Remember that we need to distinguish symmetry operations from symmetry elements, i.e. the operations of rotation (A ), rotoinversion (l ) and rotoreflection (S ) on the one hand, from a rotation axis (n), rotoinversion axis (fi) or rotoreflection axis (n), on the other. 

A mirror plane and a twofold axis whose intersection forms the angle 0 generate a rotoreflection of period 20 (or a corresponding rotoinversion). Figure 2.13(c) shows a mirror plane and a twofold rotation axis which make an angle of 45° and which create a 90° rotoreflection axis. Multiple application of these two operations yields a 4 axis, two mirror planes and two twofold axes. 

For each crystal system, three axes (four in the hexagonal system) are assigned that coincide with the symmetry axes or are perpendicular to mirror planes, ha the isometric system, these axes coincide with the four-fold rotation or rotoinversion axes or the two-fold rotational axes. They are mutually perpendicular and are labeled ai, a.2, and a3, rather than the conventional labels of a, b, and c, because they are identical in every respect other than orientation. By convention, the positive end of the ai axis is toward the reader, the positive end of the aa axis is to the right in the plane of the paper, and the positive end of the 3 axis is up in the vertical direction. The axes are shown for the octahedron in Figure 27. 

Rotoinversion. The symmetry element is a rotoinversion axis or, for short, an inversion axis. This refers to a coupled symmetry operation which involves two motions take a rotation through an angle of 360/N degrees immediately followed by an inversion at a point located on the axis (Fig. 3.3) ... 

The requirement for the existence of enantiomers is a chiral structure. Chirality is solely a symmetry property a rigid object is chiral if it is not superposable by pure rotation or translation on its image formed by inversion. Such an object contains no rotoinversion axis (or rotoreflection axis cf. Section 3.1). Since the reflection plane and the inversion center are special cases of rotoinversion axes (2 and 1), they are excluded. 

Only the two-fold rotation about c of the twin lattice is a correct twin operation, in the sense that it restores the lattice, or a sublattice, of the individuals. If however twin operation. The rotations about c give simply the (approximate) relative rotations between pairs of twinned mica individuals, but are not true twin operations. Similar considerations apply also to the rotoinversion operations, s depends upon the obliquity of the twin but, at least in Li-poor trioctahedral micas, is sufficiently small to be neglected for practical purposes (Donnay et al. 1964 Nespolo et al. 1997a,b, 2000a). 

A rotoinversion l about an axis is a rotation by the angle (f> followed by an inversion through a point on the axis. This is also a combined operation of the second type which is neither a pure rotation nor a pure inversion. It is easily seen that each rotoinversion is equivalent to a rotoreflection ) = S n(j>), S() = n + ). Thus, operations of the second type may be represented by either rotoreflections or by rotoinversions. We could limit ourselves to one or other of these two representations. However, the two most commonly used systems of nomenclature applied to geometrical symmetry do not use the same convention. The Schoenfiies system is based on rotoreflections, whereas the Hermann-Mauguin (or international) system is based on rotoinversions. In crystallography we prefer to use the Hermann- Mauguin system. The correspondence between l and S is shown in Table 2.1. 

By combining the rotation with the reflection are obtained the axes of rotoreflexion or the gyroids, and combining the rotation with the inversion are obtained the axes of inversion or rotoinversion. These are complex axes (elements) of symmetry. Are noted by the barred order of rotation (ii) or for the gyroids, respectively with A for the inversion axes. It will be demonstrated that only one of those operations of symmetry is self-consistent, all others may be reduced to the association of simple operations is about the tetra-gyroid A or the fourth order axis of inversion Af. Let s follow the effect of the rotoinversion axes. 

---