Resin transport

Kardos,J. L., Dudukovic, M. P., Dave,R. Void Growth and Resin Transport During Processing of Thermosetting — Matrix Composits. Vol. 80, pp. 101 — 123. 

The stability, growth, and transport of voids during composite processing is reviewed. As a framework for this model, the autoclave process was selected, but the concepts and equations may be applied equally effectively in a variety of processes, including resin transfer molding, compression molding, and filament winding. In addition, the problem of resin transport and its intimate connection with void suppression are analyzed. 

For thick epoxy laminates processed in the autoclave, voids once formed and stabilized can only be removed by dissolution or by resin flow. Furthermore, resin gradients are deleterious to structural laminates. These two key phenomena make an understanding of resin transport vital to the development of any processing model. 

Any on-line process control model used for computer-aided manufacturing of high-performance composite laminates must include a thorough treatment of void stability and growth as well as resin transport. These two key components, along with a heat transfer model and additional chemorheological information on kinetics and material properties, should permit optimized production of void-free, controlled-thickness parts. A number of advances have been made toward this goal. 

Organic matter in unpolluted freshwater is usually in the form of humic acids (Section 13.6), which may discolor drinking water, foul ion-exchange resins, transport toxic metal ions, or generate carcinogenic chlorocarbons if the water is chlorinated (see below). Humic compounds may be removed by coagulation. Low levels of organic solutes can be removed by sorption on activated charcoal. 

Void Growth and Resin Transport During Processing of Thermosetting — Matrix Composites... 

FIGURE 13.3-2 Dense-phase resin transport. Vd, bulk volume of resin transported V, volume of transfer water handled by pump VJVf — 0-9 for resins. 

---