Replenishers Kodak

Only replenish undiluted Ansco 47. Follow the instructions for replenishing Kodak D-76, under Kodak D-76R. 

Spent Kodak ultratek fixer and replenisher were accumulated (3 parts water per 1 part fixer dilution about 100 gal or 378.5 L accumulated) and... 

Kodak ultratek fixer and replenisher. This chemical formulation has a high biological oxygen demand, and it is expected to cause significant oxygen depletion in aquatic systems. It is expected to have a low potential to affect aquatic organics. It is expected... 

A. Picking up for disposal Spent Kodak ultratec developer and replenisher 55 gal drum S145/dram... 

B. Picking up for disposal C. Transportation of drum to the Massachusetts disposal facility (maximum 6 drums per load) Spent Kodak ultratek Hxer and replenisher 55 gal drum S130/dram USS300.00/load... 

NY) and kept at 4°C in the dark until developed. The time of exposure varied between 12 days and one month. The films were developed in Kodak X-ray Developer-Replenisher ( 146-5327) and fixed in Kodak Rapid Fix ( 146-4106). Selected areas on the TLC plates directly under the spots on the films were eluted from the silica gel and tested in the anti-Thy-1 PFC assay. 

For Kodak D-25 45.0ml of replenisher should be added for each 802 inches of film, for the first 12 rolls per liter. For the next 12 rolls per liter, add only 22.0ml per roll. Discard the developer after 20 rolls have been processed. 

The volume of the first developer needs to be kept constant by adding Kodak D-67R. Replenish the first developer with 18.5 ml per 802 inches. If only one roll of film is developed it is possible that less than 18.5 ml will be missing from the total volume. If this is the case then remove as much as necessary to reduce the volume by 18.5 ml and then add the replenisher. 

---