Relief valves fouling/corrosion protection

Vessels should be provided with overpressure protection as required. Vents and relief valve vent piping should be so arranged Uiat Uie vented vapors will not constitute a liazard. Relief valves must be kept free from corrosion or fouling and should be operable at all Umes. 

A depropanizer was designed to operate at 270 psig on a corrosive stream with a high fouling tendency. It was protected from overpressuring by a relief valve set at 300 psig. On one occasion the operators found... 

Protecting Relief Valves from Fouling and Corrosion... 

There are two methods that 1 have used to protect process relief valves from exposure to corrosive or fouling environments ... 

---

See also in sourсe #XX -- [ ]

---