Regions of the Electromagnetic Spectrum

MW frequency of 10 Hz. There are various considerations that influence the choice of the radiation frequency. Higher frequencies, which require higher magnetic fields, give inlierently greater sensitivity by virtue of a more favourable Boltzmaim factor (see equation (b 1.15.11)). However, several factors place limits on the frequency employed, so that frequencies in the MW region of the electromagnetic spectrum remain favoured. One limitation is the sample size at frequencies around 40 GHz the dimensions of a typical... 

The determination of an analyte s concentration based on its absorption of ultraviolet or visible radiation is one of the most frequently encountered quantitative analytical methods. One reason for its popularity is that many organic and inorganic compounds have strong absorption bands in the UV/Vis region of the electromagnetic spectrum. In addition, analytes that do not absorb UV/Vis radiation, or that absorb such radiation only weakly, frequently can be chemically coupled to a species that does. For example, nonabsorbing solutions of Pb + can be reacted with dithizone to form the red Pb-dithizonate complex. An additional advantage to UV/Vis absorption is that in most cases it is relatively easy to adjust experimental and instrumental conditions so that Beer s law is obeyed. 

The so-called peak power delivered by a pulsed laser is often far greater than that for a continuous one. Whereas many substances absorb radiation in the ultraviolet and infrared regions of the electromagnetic spectrum, relatively few substances are colored. Therefore, a laser that emits only visible light will not be as generally useful as one that emits in the ultraviolet or infrared ends of the spectrum. Further, witli a visible-band laser, colored substances absorb more or less energy depending on the color. Thus two identical polymer samples, one dyed red and one blue, would desorb and ionize with very different efficiencies. 

A dye molecule has one or more absorption bands in the visible region of the electromagnetic spectrum (approximately 350-700 nm). After absorbing photons, the electronically excited molecules transfer to a more stable (triplet) state, which eventually emits photons (fluoresces) at a longer wavelength (composing three-level system.) The delay allows an inverted population to build up. Sometimes there are more than three levels. For example, the europium complex (Figure 18.15) has a four-level system. 

Neodymium and YAG Lasers. The principle of neodymium and YAG lasers is very similar to that of the ruby laser. Neodymium ions (Nd +) are used in place of Cr + and are often distributed in glass rather than in alumina. The light from the neodymium laser has a wavelength of 1060 nm (1.06 xm) it emits in the infrared region of the electromagnetic spectrum. Yttrium (Y) ions in alumina (A) compose a form of the naturally occurring garnet (G), hence the name, YAG laser. Like the ruby laser, the Nd and YAG lasers operate from three- and four-level excited-state processes. 

Table 3.1 summarizes the details of typical sources, absorption cells, dispersing elements and detectors used in different regions of the electromagnetic spectrum. 

Assuming reasonable bond lengths, estimate the frequency of the J= 15 — 14 transition in the linear molecule N=C—(C=C)6—H. In which region of the electromagnetic spectrum does it lie ... 

Question. Calculate, to three significant figures, the wavelength of the first member of each of the series in the spectrum of atomic hydrogen with the quantum number (see Section f.2) n" = 90 and 166. In which region of the electromagnetic spectrum do these transitions appear ... 

Simple aziridines are optically transparent in the UV region of the electromagnetic spectrum (B-69MI50401). In more highly substituted aziridines, such as the 2-aroyl-3-arylaziridines (9), there is an interaction between the carbonyl and aryl ring substituents... 

Excimer lasers use gases, but because of their special properties are usually considered as a class of their own. Excimer is short for excited dimer, which consists of two elements, such as argon and fluorine, that can be chemically combined in an excited state only. These lasers typically emit radiation with veiy small wavelengths, in the ultraviolet region of the electromagnetic spectrum. This shorter wavelength is an enormous advantage for many applications. 

Azo-coupled products are widely used as dyes for textiles because their extended conjugated tt electron system causes them to absorb in the visible region of the electromagnetic spectrum (Section 14.9). / -(Dimethylamino)azobenzene, for instance, is a bright yellow compound that was at one time used as a coloring agent in margarine. 

Absorption spectrum (Section 12.5) A plot of wavelength of incident light versus amount of light absorbed. Organic molecules show absorption spectra in both the infrared and the ultraviolet regions of the electromagnetic spectrum. 

---