Reference electrodes, aqueous solutions polymer membranes

The experimental setup is shown in Figure 9.23. The Pt-black catalyst film also served as the working electrode in a Nafion 117 solid polymer electrolyte cell. The Pt-covered side of the Nafion 117 membrane was exposed to the flowing H2-02 mixture and the other side was in contact with a 0.1 M KOH aqueous solution with an immersed Pt counterelectrode. The Pt catalyst-working electrode potential, Urhe (=Uwr)> was measured with respect to a reversible reference H2 electrode (RHE) via a Luggin capillary in contact with the Pt-free side of the Nafion membrane. 

In polymer-based ISEs, electrical contact between the membrane and inner reference electrode is made via an inner filling electrolyte. This type of ISE is the most common and they are usually referred to as liquid contact ISEs or very often simply ISEs. On the other hand, the contact can be obtained by the substitution of the aqueous inner solution with another polymeric material, to produce so-called solid-contact ISEs Table 2.1 provides current achievements in trace level... 

---