Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Stereoselective reductions, lithium aluminum hydride

The chemical reduction of enamines by hydride again depends upon the prior generation of an imonium salt (111,225). Thus an equivalent of acid, such as perchloric acid, must be added to the enamine in reductions with lithium aluminum hydride. Studies of the steric course (537) of lithium aluminum hydride reductions of imonium salts indicate less stereoselectivity in comparison with the analogous carbonyl compounds, where an equatorial alcohol usually predominates in the reduction products of six-membered ring ketones. [Pg.428]

Compared to the lithium enolates of l and 5, the higher stereoselectivity obtained by the Mukaiyama variation is, in general, accompanied by reduced chemical yields. The chiral alcoholic moieties of the esters 3 and 7 can be removed either by reduction with lithium aluminum hydride (after protection of the earbinol group) or by aqueous alkaline hydrolysis with lithium hydroxide to afford the corresponding carboxylic acid. In both cases, the chiral auxiliary reagent can be recovered. [Pg.478]

The stereoselectivity of the hydride reduction of conjugated cyclohexenones has also been subjected to close examination from both experimental and theoretical viewpoints. Much of the work has involved polycyclic systems, e.g.. steroids which have little conformational flexibility and in which axial and equatorial directions of approach can be clearly defined. With small" hydride donors, these substrates show an even clearer preference for axial attack than the corresponding cyclohexanones. For examples involving reductions with lithium aluminum hydride and sodium borohydride, see Table 10. 3/(-Acetylcholest-5-en-7-one and cholest-2-en-l-one are notable in that the analogous saturated substrates are attacked from the equatorial direction115 l16. The reduction of 17/i-hydroxy-4-androsten-3-one (testosterone) to 4-androstene-3/1,17/j-diol with d.r. 90 10 can be compared with the sodium borohydride reduction of 17/i-hy-droxyandrostan-3-one (dihydrotestosterone) to androstane-3/ ,17/ -diol with d.r. 81 19 (see p 4030). [Pg.734]

The properties of chlorine azide resemble those of bromine azide. Pon-sold has taken advantage of the stronger carbon-chlorine bond, i.e., the resistance to elimination, in the chloro azide adducts and thus synthesized several steroidal aziridines. 5a-Chloro-6 -azidocholestan-3 -ol (101) can be converted into 5, 6 -iminocholestan-3l -ol (102) in almost quantitative yield with lithium aluminum hydride. It is noteworthy that this aziridine cannot be synthesized by the more general mesyloxyazide route. Addition of chlorine azide to testosterone followed by acetylation gives both a cis- and a trans-2iddMct from which 4/S-chloro-17/S-hydroxy-5a-azidoandrostan-3-one acetate (104) is obtained by fractional crystallization. In this case, sodium borohydride is used for the stereoselective reduction of the 3-ketone... [Pg.25]

The well-known reduction of carbonyl groups to alcohols has been refined in recent studies to render the reaction more regioselective and more stereoselective Per-fluorodiketones are reduced by lithium aluminum hydride to the corresponding diols, but the use of potassium or sodium borohydride allows isolation of the ketoalcohol Similarly, a perfluoroketo acid fluonde yields diol with lithium aluminum hydnde, but the related hydroxy acid is obtainable with potassium borohydnde [i f] (equations 46 and 47)... [Pg.308]

Analogously, for preparation of racemic carba-a-glucopyranose 49 from 52, esterification of (—)-52 furnished the ester 95, which was transformed into compound 96 by debromination with zinc dust and acetic acid. Stereoselective hydroxylation of 96 with osmium tetraoxide and hydrogen peroxide, followed by acetylation, gave compound 97. Lithium aluminum hydride reduction of 97, and acetylation of the product, gave pentaacetate 98, which was converted into 99 by hydrolysis. ... [Pg.39]

The stereoselective total synthesis of both ( )-corynantheidine (61) (170,171) (alio stereoisomer) and ( )-dihydrocorynantheine (172) (normal stereoisomer) has been elaborated by Szdntay and co-workers. The key intermediate leading to both alkaloids was the alio cyanoacetic ester derivative 315, which was obtained from the previously prepared ketone 312 (173) by the Knoevenagel condensation accompanied by complete epimerization at C-20 and by subsequent stereoselective sodium borohydride reduction. ( )-Corynantheidine was prepared by modification of the cyanoacetate side chain esterification furnished diester 316, which underwent selective lithium aluminum hydride reduction. The resulting sodium enolate of the a-formyl ester was finally methylated to racemic corynantheidine (171). [Pg.198]

A different approach involving cyanohydrin formation from the 3-keto sugar was also explored in the D-Fru series (Scheme 17). A mixture of epimeric cyanohydrins was quantitatively formed by reaction with sodium cyanide in methanol, albeit without stereoselectivity. Chromatographic separation of (R)- and (A)-isomers was straightforward and the former epimer was selected to exemplify the two-step transformation into an OZT. Reduction of this nitrile by lithium aluminum hydride led to the corresponding aminoalcohol, which was further condensed with thiophosgene to afford the (3i )-spiro-OZT in ca. 30% overall yield. Despite its shorter pathway, the cyanohydrin route to the OZT was not exploited further, mainly because of the disappointing yields in the last two steps. [Pg.136]

Stereoselective reductions can be further accomplished by reagents which usually do not reduce double bonds (unless conjugated with carbonyl or carboxyl functions) lithium aluminum hydride [555] or zinc [384]. [Pg.45]

Alkyl chlorides are with a few exceptions not reduced by mild catalytic hydrogenation over platinum [502], rhodium [40] and nickel [63], even in the presence of alkali. Metal hydrides and complex hydrides are used more successfully various lithium aluminum hydrides [506, 507], lithium copper hydrides [501], sodium borohydride [504, 505], and especially different tin hydrides (stannanes) [503,508,509,510] are the reagents of choice for selective replacement of halogen in the presence of other functional groups. In some cases the reduction is stereoselective. Both cis- and rrunj-9-chlorodecaIin, on reductions with triphenylstannane or dibutylstannane, gave predominantly trani-decalin [509]. [Pg.63]

Reagents of choice for reduction of epoxides to alcohols are hydrides and complex hydrides. A general rule of regioselectivity is that the nucleophilic complex hydrides such as lithium aluminum hydride approach the oxide from the less hindered side [511, 653], thus giving more substituted alcohols. In contrast, hydrides of electrophilic nature such as alanes (prepared in situ from lithium aluminum hydride and aluminum halides) [653, 654, 655] or boranes, especially in the presence of boron trifluoride, open the ring in the opposite direction and give predominantly less substituted alcohols [656, 657,658]. As far as stereoselectivity is concerned, lithium aluminum hydride yields trans products [511] whereas electrophilic hydrides predominantly cis products... [Pg.83]

Acid treatment of a 3 1 mixture of murrayafoline A (7) and koenoline (8) led to chrestifoline A (192) in 70% yield. Addition of murrayafoline A (7) to a mixture of 1057 and lithium aluminum hydride in ether and dichloromethane afforded bismurrayafoline-A (197) in 19% yield (662) (Scheme 5.166). In addition to the aforementioned methods, the same group also reported a stereoselective synthesis of axially chiral bis-carbazole alkaloids by application of their "lactone concept" (663) and a reductive biaryl coupling leading to 2,2 -bis-carbazoles (664). [Pg.297]

The methyl group was introduced by a two-step procedure. Thus, the hydrazone Michael adducts 52 were converted into the enol pivaloates 53 in excellent yields and diastereomeric excesses de > 96%) by treatment with pivaloyl chloride and triethylamine. After treatment with lithium dimethylcuprate the chiral auxiliary was removed by addition of 6n HCl in order to obtain the 5-substituted 2-methylcyclopentene carboxylate 54 in good yields and with excellent stereoselectivity (de, ee > 96%). Finally, the asymmetric synthesis of dehydroiridodiol (55, R = Me, = H) and its analogues was accomplished by reduction of 54 with lithium aluminum hydride or L-selectride leading to the desired products in excellent yields, diastereo- and enantiomeric excesses (de, ee > 96%). [Pg.51]

Reduction of 3-trimethyls1lyl-2-propyn-l-ol exemplifies the problem of stereoselectivity in hydride reduction of acetylenic alcohols to E-allyl alcohols.4 Early reports5 that lithium aluminum hydride stereoselectively reduced acetylenic alcohols gave way to closer scrutiny which revealed a striking solvent dependence of the stereochemistry. Specifically, the... [Pg.186]

Reviews on stoichiometric asymmetric syntheses M. M. Midland, Reductions with Chiral Boron Reagents, in J. D. Morrison, ed., Asymmetric Synthesis, Vol. 2, Chap. 2, Academic Press, New York, 1983 E. R. Grandbois, S. I. Howard, and J. D. Morrison, Reductions with Chiral Modifications of Lithium Aluminum Hydride, in J. D. Morrison, ed.. Asymmetric Synthesis, Vol. 2, Chap. 3, Academic Press, New York, 1983 Y. Inouye, J. Oda, and N. Baba, Reductions with Chiral Dihydropyridine Reagents, in J. D. Morrison, ed., Asymmetric Synthesis, Vol. 2, Chap. 4, Academic Press, New York, 1983 T. Oishi and T. Nakata, Acc. Chem. Res., 17, 338 (1984) G. Solladie, Addition of Chiral Nucleophiles to Aldehydes and Ketones, in J. D. Morrison, ed., Asymmetric Synthesis, Vol. 2, Chap. 6, Academic Press, New York, 1983 D. A. Evans, Stereoselective Alkylation Reactions of Chiral Metal Enolates, in J. D. Morrison, ed., Asymmetric Synthesis, Vol. 3, Chap. 1, Academic Press, New York, 1984. C. H. Heathcock, The Aldol Addition Reaction, in J. D. Morrison, ed., Asymmetric Synthesis, Vol. 3, Chap. 2, Academic Press, New York, 1984 K. A. Lutomski and A. I. Meyers, Asymmetric Synthesis via Chiral Oxazolines, in J. D. Morrison, ed., Asymmetric Synthesis, Vol. 3, Chap. [Pg.249]

Attempts to reduce the quaternary salts of 4-oxo-4//-pyrido[l,2-a]-pyrimidines with sodium borohydride or lithium aluminum hydride remained unsuccessful.137 At the same time the 6,7,8,9-tetrahydro quaternary salts may readily be reduced with sodium borohydride to the 1-alkyl-l,6,7,8,9,9a-hexahydro derivatives.75-77,133 1481269 270 Sodium borohydride reduction of the 1,6- and l,7-dimethyl-3-carbamoyl-4-oxo-6,7,8,9-tetrahydro-4H-pyrido[l,2-a]pyrimidinium salts proceeds stereoselectively and yields the thermodynamically controlled product.271 The l-methyl-3-carbamoyl-4-oxo-l,6,7,8,9,9a-hexahydropyrido[l,2-a]pyrimidines were also prepared by the catalytic (Pd/C) hydrogenation of the 1,6,7,8-tetrahydro derivatives,270-272 but this reaction led to a diastereoisomeric mixture.271... [Pg.295]

Reduction of isoxazolines, i-amino alcohols. Lithium aluminum hydride reduction of the ready available isoxazolines 1 is effected with unusually high 1,3-asymmetric induction (equation I). The stereoselectivity is not affected drastically by the presence of a hydroxyl group in the side chains at C3 or C5, but isoxazolines bearing a 4a-hydroxyl group are reduced almost entirely to the erythro ( fi)-diastereomer.1... [Pg.487]

Regio- and stereoselective reduction of the non-silylated triple bond, either by partial catalytic hydrogenation,13,14,15 or by lithium aluminum hydride reduction of the propargylic alcohols,11,16,17 afford (after desilylation), respectively, terminal (2)- and (E)-enynes. Furthermore, the remaining... [Pg.177]

The authors provided some experimental support for their hypothesis by performing various diastereoselective reactions on racemic or optically active compounds. Indeed, they found some differences in stereoselectivity between the two cases. Reduction of DL-camphor or D-camphor with lithium aluminum hydride, for example, gave ratios of isobomeol to bomeol of 7.93 and 9.20, respectively. [Pg.263]

Primary and secondary alkyl bromides, iodides, and sulfonates can be reduced to the corresponding alkanes with LiBHEt3 (superhydride) or with lithium aluminum hydride (LiAlH4, other names lithium tetrahydridoaluminate or lithium alanate). If such a reaction occurs at a stereocenter, the reaction proceeds with substantial or often even complete stereoselectivity via backside attack by the hydride transfer reagent. The reduction of alkyl chlorides to alkanes is much easier with superhydride than with LiAlH4. The same is true for sterically hindered halides and sulfonates ... [Pg.778]

The second synthesis of lasubine II (6) by Narasaka et al. utilizes stereoselective reduction of a /3-hydroxy ketone O-benzyl oxime with lithium aluminum hydride, yielding the corresponding syn-/3-amino alcohol (Scheme 5) 17, 18). The 1,3-dithiane derivative 45 of 3,4-dimethoxybenzaldehyde was converted to 46 in 64% yield via alkylation with 2-bromo-l,l-dimethoxyethane followed by acid hydrolysis. Treatment of the aldol, obtained from condensation of 46 with the kinetic lithium enolate of 5-hexen-2-one, with O-benzylhydroxylamine hy-... [Pg.162]


See other pages where Stereoselective reductions, lithium aluminum hydride is mentioned: [Pg.523]    [Pg.183]    [Pg.87]    [Pg.123]    [Pg.183]    [Pg.163]    [Pg.38]    [Pg.666]    [Pg.396]    [Pg.172]    [Pg.75]    [Pg.1002]    [Pg.113]    [Pg.66]    [Pg.424]    [Pg.517]    [Pg.260]    [Pg.161]    [Pg.318]    [Pg.604]    [Pg.34]    [Pg.334]    [Pg.163]    [Pg.487]    [Pg.32]    [Pg.63]    [Pg.196]   
See also in sourсe #XX -- [ Pg.214 ]




SEARCH



Aluminum reduction

Lithium aluminum hydride, reduction

Lithium hydride reduction

Lithium reductions

Reduction aluminum hydride

Reduction stereoselective

Reduction stereoselectivity

© 2024 chempedia.info