Reductants chromium

Several high-temperature procedures have been described in the literature for the preparation of the transition-metal dioxides. Direct oxidation of the metals, lower oxides, chlorides, or nitrate precursors provides a convenient route to the dioxides of several metals Ti, Mn, Ru, Rh, Os, Ir, and Pt.1,3-5 (Syntheses of the rutile forms of rhodium and platinum dioxides by direct oxidation requires application of high pressures.5) Reduction of higher oxides is the most common method of synthesis for these dioxides V02, Nb02, Mo02, W02, and /3-Re02.4,6-8 Stoichiometry in these reactions is most readily controlled by use of the respective metal or a lower oxide as reductant. Chromium dioxide is normally synthesized by hydrothermal reduction of the trioxide.9... 

The dichromate ion oxidises iron(II) to iron(III), sulphite to sulphate ion, iodide ion to iodine and arsenic(III) to arsenic(V) (arsenate). Reduction of dichromate by sulphite can be used to prepare chrome alum, since, if sulphur dioxide is passed into potassium dichromate acidified with sulphuric acid, potassium and chromium(III) ions formed are in the correct ratio to form the alum, which appears on crystallisation ... 

Note. Both tetramethylene glycol (1 4-butanediol) and hexamethylene glycol (1 6 hexaiiediol) may be prepared more conveniently by copper-chromium oxide reduction (Section VI,6) or, for small quantities, by reduction with lithium aluminium hydride (see Section VI,10). 

Trimethylene dibromide (Section 111,35) is easily prepared from commercial trimethj lene glycol, whilst hexamethylene dibromide (1 O dibromohexane) is obtained by the red P - Br reaction upon the glycol 1 6-hexanediol is prepared by the reduction of diethyl adipate (sodium and alcohol lithium aluminium hydride or copper-chromium oxide and hydrogen under pressure). Penta-methylene dibromide (1 5-dibromopentane) is readily produced by the red P-Brj method from the commercially available 1 5 pentanediol or tetra-hydropyran (Section 111,37). Pentamethylene dibromide is also formed by the action of phosphorus pentabromide upon benzoyl piperidine (I) (from benzoyl chloride and piperidine) ... 

The bacterial reduction of Cr(VI) to Cr(III) discussed above is also being used to reduce the hazards of chromium in soils and water (104). 

Modem chrome-tanning methods are weU controUed and employ an extensive knowledge of the chemistry of the system. The most common chromium-tanning material used is basic chromium sulfate [12336-95-7] Cr(0H)S04, made by the reduction of sodium bichromate with sulfur dioxide or by sulfuric acid and a sugar. 

Aromatic rings in lignin may be converted to cyclohexanol derivatives by catalytic hydrogenation at high temperatures (250°C) and pressures (20—35 MPa (200—350 atm)) using copper—chromium oxide as the catalyst (11). Similar reduction of aromatic to saturated rings has been achieved using sodium in hquid ammonia as reductants (12). 

In past years, metals in dilute sulfuric acid were used to produce the nascent hydrogen reductant (42). Today, the reducing agent is hydrogen in the presence of a catalyst. Nickel, preferably Raney nickel (34), chromium or molybdenum promoted nickel (43), or supported precious metals such as platinum or palladium (35,44) on activated carbon, or the oxides of these metals (36,45), are used as catalysts. Other catalysts have been suggested such as molybdenum and platinum sulfide (46,47), or a platinum—nithenium mixture (48). 

In removing excess free chlorine from municipal or industrial water and from wastewater, sodium sulfite competes with bisulfite or sulfur dioxide. Other commercial appHcations of sodium sulfite in wastewater treatment include the reduction of hexavalent chromium to the less toxic Cr " salts as well as the precipitation of silver and mercury. 

---