Reactions nitrogen dioxide

Smog formation in the atmosphere is caused by such reaction. Nitrogen dioxide is rapidly oxidized by ozone to form nitrogen pentoxide ... 

At a particular time during the reaction, nitrogen dioxide is being consumed at the rate of 0.0013 Af/s. (a) At what rate is molecular oxygen being consumed (b) At what rate is dinitrogen pentoxide being produced ... 

At a particular time during the reaction, nitrogen dioxide is being consumed at the rate of 0.00130 M/s. 

Electrons are shared when nitrogen monoxide combines with oxygen, a spontaneous reaction, to give nitrogen dioxide... 

If this reaction takes place in air, the evolved nitrogen monoxide is oxidised to the dioxide and this dissolves again as in equation (9.1) hence virtually complete conversion of nitrogen dioxide to nitric acid can occur (see nitric acid, below). With alkalis, a mixture of nitrite and nitrate is formed ... 

In the examples, a nitro group is substituted for a hydrogen atom, and water is a by-product. Nitro groups may, however, be substituted for other atoms or groups of atoms. In Victor Meyer reactions which use silver nitrite, the nitro group replaces a hahde atom, eg, I or Br. In a modification of this method, sodium nitrite dissolved in dimethyl formamide or other suitable solvent is used instead of silver nitrite (1). Nitro compounds can also be produced by addition reactions, eg, the reaction of nitric acid or nitrogen dioxide with unsaturated compounds such as olefins or acetylenes. 

When nitrogen dioxide is used, the main reaction steps are as in equations 8 and 9. 

Reactions 8 and 9 are important steps for the Hquid-phase nitration of paraffins. The nitric oxide which is produced is oxidized with nitric acid to reform nitrogen dioxide, which continues the reaction. The process is compHcated by the presence of two Hquid phases consequentiy, the nitrogen oxides must transfer from one phase to another. A large interfacial area is needed between the two phases. 

Oxidation of Nitric Oxide. Nitric oxide [10102 3-9] reacts slowly with oxygen to yield nitrogen dioxide [10102 4-0] according to the reversible reaction (eq. 12) for which A 7/295 —57kJ/mol of NO consumed (13.6 kcal/mol). 

Low temperatures strongly favor the formation of nitrogen dioxide. Below 150°C equiUbrium is almost totally in favor of NO2 formation. This is a slow reaction, but the rate constant for NO2 formation rapidly increases with reductions in temperature. Process temperatures are typically low enough to neglect the reverse reaction and determine changes in NO partial pressure by the rate expression (40—42) (eq. 13). The rate of reaction, and therefore the... 

At room temperature, Htde reaction occurs between carbon dioxide and sodium, but burning sodium reacts vigorously. Under controUed conditions, sodium formate or oxalate may be obtained (8,16). On impact, sodium is reported to react explosively with soHd carbon dioxide. In addition to the carbide-forrning reaction, carbon monoxide reacts with sodium at 250—340°C to yield sodium carbonyl, (NaCO) (39,40). Above 1100°C, the temperature of the DeviHe process, carbon monoxide and sodium do not react. Sodium reacts with nitrous oxide to form sodium oxide and bums in nitric oxide to form a mixture of nitrite and hyponitrite. At low temperature, Hquid nitrogen pentoxide reacts with sodium to produce nitrogen dioxide and sodium nitrate. 

Isoxazole-3-carbaldehyde has been obtained as a minor product from the reaction of acetylene with a mixture of nitric oxide and nitrogen dioxide (61JOC2976). Although 3-aryl-4-formylisoxazoles have been synthesized in good yields from the reaction of benzonitrile Af-oxides with 3-(dimethylamino)-2-propen-l-one (71S433), the parent member of the series, isoxazole-4-carbaldehyde, has never been reported. It may possibly be obtained by the addition of fulminic acid to 3-(dimethylamino)-2-propen-l-one. 

Nitrogen oxide is oxidized with the excess oxygen from tlie previous process phase to form nitrogen dioxide. The reaction is exothermic ... 

Radical Reactions with Nitric Oxide and Nitrogen Dioxide... 

A mixture of 300 ml. of water, 150 ml. of concentrated nitric acid, and 0.2 g. of sodium nitrite (Note 2) is placed in a 2-1. threenecked flask equipped with a stirrer and a thermometer. The stirred mixture is warmed to 45°, and 2 g. of l,2,4-triazole-3(5)-thiol is added. When oxidation starts, as indicated by the evolution of brown fumes of nitrogen dioxide and a rise in temperature, a bath of cold water is placed under the reaction flask to provide cooling and an additional 99 g. (total, 101 g. 1 mole) of 1,2,4-triazole-3(5)-thiol is added in small portions over the course of 30-60 minutes. The rate of addition and the extent of cooling by the water bath are so regulated as to keep the temperature close to 45 7° all during the addition. The water bath is kept cold by the occasional addition of ice. 

Prevent air contamination in high-pressure reactions since the nitrogen dioxide which could form may pose ignition and detonation hazards. 

Neutralization of strong mineral acids from metal finishing trades (sulphide and hypochlorite contamination common) Fierce reaction Possibility of mixing with water or organic materials Chlorine Nitrogen dioxide Sulphur dioxide Hydrogen sulphide... 

In addition to the health risks, nitrogen dioxide in reaction to textile dyes can cause fading or yellowing of fabrics. Exposure to nitrogen dioxide can also weaken fabrics or reduce their affinity for certain dyes. Industry has devoted considerable resources to developing textiles and dyes resistant to nitrogen oxide exposure. 

Oxidants Substances present in air, such as nitrogen dioxide, ozone, etc., that are capable of oxidizing other chemicals or elements in oxidation-reduction type chemical reactions. 

---