Range edge

Zone 1 The probe is far away form the slot the interaction with the slot is low. The impedance change is small. This situation is tme until the probe reaches the edge of the slot. The range of the zone is [- x 1 ]... 

Figure A3.14.12. The first experimental observation of a Turing pattern in a gel strip reactor. Solutions containing separate components of the CIMA/CDIMA reaction are flowed along each edge of the strip and a spatial pattern along the horizontal axis develops for a range of experimental conditions. (Reprinted with pennission from [38], The American Physical Society.)...

From the above descriptions, it becomes apparent that one can include a wide variety of teclmiques under the label diffraction methods . Table Bl.21.1 lists many techniques used for surface stmctural detemiination, and specifies which can be considered diffraction methods due to their use of wave interference (table Bl.21.1 also explains many teclmique acronyms commonly used in surface science). The diffraction methods range from the classic case of XRD and the analogous case of FEED to much more subtle cases like XAFS (listed as both SEXAFS (surface extended XAFS) and NEXAFS (near-edge XAFS) in the table). 

Diamond wheel specifications show diamond concentration in the grinding rim a concentration of 100 equals 25 vol % diamond. Most wheels have diamond concentrations in the range of 50 to 200 and selection depends on use. Lower concentrations work best on wide contact surfaces higher concentrations work best on narrow edge widths (47). 

Early injection lasers were small rectangular parallelepipeds made by cutting a wafer of GaAs. Feedback was provided by mirrors polished on two edges or by cleaving. The wafer had ap—n junction incorporated into it and broad area or stripe contacts were provided. Laser stmctures have since evolved to satisfy a wide range of appHcation specific requirements. 

The next larger film sizes, considered a medium format, are 120-, 220-, and 70-mm roU films. The first two are about 62-mm wide and unperforated the last is bulk motion-picture stock perforated along both edges. These are also available in a range of emulsion types. 

---