Pyrrolidines arylation

In peptide syntheses, where partial racemization of the chiral a-carbon centers is a serious problem, the application of 1-hydroxy-1 H-benzotriazole ( HBT") and DCC has been very successful in increasing yields and decreasing racemization (W. Kdnig, 1970 G.C. Windridge, 1971 H.R. Bosshard, 1973), l-(Acyloxy)-lif-benzotriazoles or l-acyl-17f-benzo-triazole 3-oxides are formed as reactive intermediates. If carboxylic or phosphoric esters are to be formed from the acids and alcohols using DCC, 4-(pyrrolidin-l -yl)pyridine ( PPY A. Hassner, 1978 K.M. Patel, 1979) and HBT are efficient catalysts even with tert-alkyl, choles-teryl, aryl, and other unreactive alcohols as well as with highly bulky or labile acids. 

When allene derivatives are treated with aryl halides in the presence of Pd(0), the aryl group is introduced to the central carbon by insertion of one of the allenic bonds to form the 7r-allylpalladium intermediate 271, which is attacked further by amine to give the allylic amine 272. A good ligand for the reaction is dppe[182]. Intramolecular reaction of the 7-aminoallene 273 affords the pyrrolidine derivative 274[183]. 

Aryl halides with a halogen activated by electron-withdrawing groups react with pyrrolidine enamines of cyclic ketones (68) to give the a-arylated ketones after hydrolysis. The enamine (28) with 2,4-dinitrochlorobenzene gave an excellent yield of 2(2,4-dinitrophenyl)cyclohexanone (88). The... 

The enamine (28) did not undergo C arylation with p-nitrochlorobenzene under these conditions, and at higher temperatures N arylation and subsequent eleavage with formation of N-(4-nitrophenyl) pyrrolidine takes place (68). 

Low yields of C-arylated ketones have also been obtained by reaction of pyrrolidine enamines with diaryl iodonium salts (68). 

Tertiary pyrrolines (49, = 1) and piperideines (49, = 2) (if R = H and the enamine can exist in the monomeric form or if R = aryl) evidently possess an endocyclic -double bond (79,155,156). The stretching frequency of the double bond can be lowered to 1620-1635 cm by conjugation with an aromatic substituent. The double bond of an analogous compound with aliphatic substituents in position 2 may occupy either the endo or the exo position. Lukes and co-workers (157) have shown that the majority of the five-membered-ring compounds, traditionally formulated with the double bond in a position, possess the structure of 2-alkylidene derivatives (50) with an exocyclic double bond, infrared absorption at 1627 cm . Only the 1,2-dimethyl derivative (51) is actually a J -pyrroline, absorbing at 1632 cm . For comparison, l,3,3-trimethyl-2-methylene pyrrolidine (52) with an unambiguous exocyclic double bond has been prepared (54). 

Protection of primary aryl amines as the triazene is accomplished by diazotiza-tion of the amine followed by reaction with pyrrolidine in aq. KOH. This group is stable to metalation of the aromatic ring by metal halogen exchange. The amine is recovered by reductive cleavage with Ni-Al alloy (aq. KOH, rt, 37-68% yield). ... 

The synthesis of 5-aminothiazoles via the reaction of isocyanate derivatives with aminomalononitrile p-toluenesulfonate (AMNT) has been investigated. It was found that AMNT 12 reacted with alkyl and aryl isothiocyanates in l-methyl-2-pyrrolidine (NMP) to furnish 5-amino-2-(alkylamino)-4-cyanothiazoles (13a) and 5-amino-2-(arylamino)-4-cyanothiazoles (13b-c) in 44-81 % yields. " ... 

Alternatively, hydration of the acetylenes in cold concentrated sulfuric acid, or with mercury(II) sulfate in formic acid, yields 1-aryl-3,4-dihydro-5//-2-benzazepin-5-ones which are isolated as their methylsulfonate salts.79 If, however, acetylene 4 is stirred with pyrrolidine at room temperature then cyclization is accompanied by amination to give 8-chloro-l-(2-chlorophenyl)-4-(pyrrolidin-l-yl)-3i/-2-benzazepine (5) in high yield. 

Optically active 2-allylpiperidines and -pyrrolidines arc obtained by treating hydroxylactams containing the l-[(S)-l-arylethyl]substituent as an auxiliary (see Appendix) with tin(IV) chloride and trimethyl(2-propenyl)silane46. Interestingly, the moderate diastereoselection when the aryl group is phenyl decreases when 2-chlorophenyl is used, whereas the sense of the stereoselectivity reverses for 2,6-dichlorophenyl or pentachlorophcnyl. These results are rationalized by application of molecular orbital theory and substrate conformational preferences46. 

The Michael additions of chiral cycloalkanone imines or enamines, derived from (FV l-l-phcnyl-ethanamine or (5)-2-(methoxymethyl)pyrrolidine, are highly diastereofacially selective reactions providing excellent routes to 2-substituted cycloalkanones. This is illustrated by the addition of the enamine of (S)-2-(methoxymethyl)pyrrolidine and cyclohexanone to 2-(aryl-methylene)-l,3-propanedioates to give, after hydrolysis, the (2 5,a.S )-oxodicstcrs in 35-76% yield with d.r. (2 S,aS)/(2 S,a/ ) 94 6- > 97 3 and 80-95% ee214. 

In a related study, the reaction of the enamine, l,2-dihydro-3-(2-methoxymethyl-l-pyrrolidin-yl)naphthalene [from 3,4-dihydro-2(l//)-naphthalenonc and (S)-2-(methoxymethyl)pyrrolidine] with 2-aryl-l-nitroethenes gave, after hydrolysis, an 83 17 to 95 5 mixture of the (3S,YR)- and (1/ ,1 T )-nitro ketones31. 

Campos, K.R., Klapers, A., Waldman, J.H., Dormer, P.G., Chen, C.Y. (2006) Enantioselective, Palladium-Catalyzed a-Arylation of N-Boc-pyrrolidine. Journal of the American Chemical Society, 128, 3538-3539. 

Other patent reports covering PDF inhibitors from structural classes different from those discussed above include hydrazides (43) [118], aryl-substituted pyrrolidines (44) [119], benzimidazoles (45, 46) [120-121], hydantoins (47) [122] and oxo-pyrrolidines (48) [123], A prodrug approach utilising PDF has been published by Pei, and patents have been published by NewBiotics, but in this case the compounds of interest are used as substrates rather than inhibitors (49) [124-126]. 

The drug discovery route to compound 1 started out with the expensive and poorly available boronic acid 2, which was coupled with aryl bromide 3 (Scheme 8.1). Hydrogenation of the resulting pyrrole 4 provided the racemic pyrrolidine 5. At... 

We became interested in a disconnection between the pyrrolidine and the aryl group (Approach D) as the most convergent method for enantioselective construction of 12 [10]. Although (-)-sparteine mediated enantioselective lithiation of N-Boc pyrrolidine 19 is well established by Beak [11], arylation of the resulting chiral... 

Scheme 8.11 Enantioselective coupling of N-Boc pyrrolidine with aryl bromide 3.

The key to the success of the synthesis was the development of a novel method for enantioselective formation of a-arylpyrrolidines. In this method, (-)-sparteine-mediated, enantioselective lithiation of N-Boc-pyrrolidine 19 was followed by an in situ transmetallation to zinc and Pd-catalyzed coupling reaction with aryl bromide 3, which afforded 2-arylpyrrolidine in 63% isolated yield and 92% ee. Notably, the acidic aniline NH2 group was tolerated under the coupling reaction conditions. 

Having demonstrated a practical and reliable method to access 2-arylpyrrolidines in high enantioselectivity, we felt that a noteworthy extension of this methodology would lie in its application to bis-arylated products 27, providing a rapid and efficient approach to enantiopure C2-symmetric 2,5-diarylpyrrolidines, which have been identified as valuable chiral auxiliaries and chiral ligand manifolds [29]. Towards this end, substrate 26a was subjected to the standard arylation conditions, which produced 2,5-diphenyl-N-Boc-pyrrolidine 27 in a 96 4 diastereomeric ratio, and 57% isolated yield (s-BuIi/TMEDA produced 27 in lower d.r. (66 34) and yield (42%)), as depicted in Scheme 8.13. 

Although impurities generated in the coupling of N-Boc pyrrolidine and aryl bromide 3 were cleanly rejected during crystallization of 5 and, therefore, did not affect the quality of the product, we decided to isolate and identify these impurities for better understanding of the coupling reaction (Scheme 8.14). The debromi-nated compound 28 was observed at a very low level (<1%). The enamide impurity... 

The new method for asymmetric arylation was applicable to a host of aryl halides, to provide a diverse array of 2-arylpyrrolidines in good yield and 92% ee, regardless of the nature of the aryl bromide component. This sequence offers a number of advantages over existing methods, and represents the most convenient and practical synthesis of enantiopure 2-aryl pyrrolidines and 2,5-diarylpyrrolidines. 

A palladium catalyst with a less electron-rich ligand, 2,2-dipyridyl-methylamine-based palladium complexes (4.2), is effective for coupling of aryl iodides or bromides with terminal alkynes in the presence of pyrrolidine and tetrabutylammonium acetate (TBAB) at 100°C in water.37 However, the reactions were shown to be faster in NMP solvent than in water under the reaction conditions. Palladium-phosphinous acid (POPd) was also reported as an effective catalyst for the Sonogashira cross-coupling reaction of aryl alkynes with aryl iodides, bromides, or chlorides in water (Eq. 4.18).38... 

Recently, the research groups of Enders (Eq. 8.38)61 and Barluenga (Eq. 8.39)62 reported on the cycloaddition of chiral 2-aminobutadiene and described elegant solutions to the stereochemistry problems (regio-, diastereo-, and enantioselectivity). The reaction of 2-[(5)-2-methoxymethyl]pyrrolidin-l-yl]buta-l,3-diene with various 2-aryl-1-nitroethenes produces after hydrolysis 5-aryl-2-methyl-substituted 4-nitrocyclohexanones in excellent enantiomeric purity (ee = 75-95%) and with high diastereoselectivity (ds = 75-95%).61... 

A highly diastereoselective exchange reaction between a variety of bis(dimethy-lamino)arylphosphines and (S)-2-(anilinomethyl)pyrrolidine (197a) and its SV-aryl analogues constituted a key step in the synthesis of a series of substituted monodonor diazaphospholidine ligands, 213-220 [90, 91] (Figure 1). 

Treated with ZnBr2 followed by enamines, phenyl thioethers 829 derived from aryl aldehydes are converted to (l-(phenylthio)alkyl ketones or aldehydes 830 in moderate to good yields (Equation 19). Enamines used in these syntheses are (1) morpholine enamine derived from diethyl ketone, (2) diethylamine enamine of propiophenone, (3) piperidine enamine derived from isovaleraldehyde, and (4) pyrrolidine enamine of cyclohexanone <2000H(53)331>. 

The oxidative C-arylation of five- to eight-membered (NH)-heterocycles such as pyrrolidine, piperidine, morpholine, etc., is observed in the reaction with iodoarenes in the presence of a rhodium catalyst, RhCl(CO)[P(Fur)3]2.95... 

---