Pyrrolidine adducts

The mono-thiocarbamate complexes [Ni(OSCNR2)2] [R = Me, Et, Pr", Pr , or Bu", R2 = ( 112)4 or (CH2)j] have been prepared. The isopropyl complex is dimeric in the vapour phase and low-polymeric or cyclic oligomeric structures are proposed for the others. Bis-pyridine and bis-pyrrolidine adducts have been isolated. - ... 

When the precursor is derived from malononitrile, reaction with maleimide leads to the expected a-cyano pyrrolidine adduct. However, methyl propiolate gives 3-carbomethoxy pyrrole, probably due to the acidity of hydrogen a- to the cyano group in the intermediate A3-pyrrolinic adduct first formed.171... 

The reaction of the N-(5,5-dimethyl-3-oxo-l-cyclohexenyl)-N -arylcarbodiimides 41 with l-(L-pyrrolidino)cyclohexene affords a mixture of the [2+4] cycloadduct 42 (46 %) and the pyrrolidine adduct to the starting carbodiimide 43 (41 %). 

Fig. 2.3 Reaction of IsoK/LG with primary amines to form stable adducts. Primary amines including lysine react with IsoK/LGs to form a hemiaminal adduct. Unlike most aldehydes which can only form the highly reversible Schiff base adduct, the hemiaminal adduct of y-ketoaldehydes can undergo a second nucleophilic attack to form a pyrrolidine adduct which dehydrates to form an irreversible pyrrole adduct. In the presence of oxygen, the pyrrole is converted to lactam and hydroxylactam adducts. Oxidation of the pyrrole leads to formation of stable crosslinked species...

SCHEME 10.17 Diels-Alder reaction of pyrrolidine adduct. 

It was, however, found 22) that when the pyrrolidine enamine of cyclohexanone was allowed to react with an excess of -nitrostyrene, a bis adduct (46), made up of one molecule of the enamine and two molecules of olefin, was obtained in addition to the monoadduct. That the bis adduct is not derived from the monoadduct was shown by the latter s failure to react with (9-nitrostyrene. Therefore, this adduct must be formed by the addition of the olefin to the dipolar intermediate (47), as shown in the following scheme. 

Kuehne and Foley (29) have found that the reaction of the pyrrolidine enamine of butyraldehyde with 2 equivalents of (8-nitrostyrene also led to a bis adduct with the structure as shown in 48. 

The reaction between the pyrrolidine enamine of butyraldehyde (52) and )3-nitrostyrene (53) provides cyclobutane adduct 54 quantitatively in either petroleum ether or acetonitrile solvent, but in the more polar ethanol solvent a 2 1 condensation product occurred. The structure of the product was shown to be 55 (57). 

The similarity between the reactions of alkenes and cyclopropanes is further demonstrated by the reactions of electrophilic cyclopropanes and cyclopropenes with enamines. Cyclopropylcyanoester74, when treated with the pyrrolidine enamine of cyclohexanone, undergoes what would be a 1,2 cycloaddition in the analogous alkene case, but is actually a 1,3 cycloaddition here, to form adduct 75 (90). A similar reaction between the... 

The reaction of methyl propiolate (82) with acyclic enamines produces acyclic dienamines (100), as was the case with dimethyl acetylenedicarboxylate, and the treatment of the pyrrolidine enamines of cycloheptanone, cyclooctanone, cycloundecanone, and cyclododecanone with methyl propiolate results in ring enlargement products (100,101). When the enamines of cyclohexanone are allowed to react with methyl propiolate, rather anomalous products are formed (100). The pyrrolidine enamine of cyclopentanone forms stable 1,2-cycloaddition adduct 83 with methyl propiolate (82). Adduct 83 rearranges to the simple alkylation product 84 upon standing at room temperature, and heating 83 to about 90° causes ring expansion to 85 (97,100). 

Another pathway for the aromatization of the cr -adducts was found in the reactions of 3-pyrrolidino-l,2,4-triazine 4-oxide 81 with amines. Thus the treatment of 1,2,4-triazine 4-oxide 81 with ammonia leads to 5-amino-1,2,4-triazine 4-oxides 54—products of the telesubstitution reaction. In this case the cr -adduct 82 formed by the addition of ammonia at position 5 of the heterocycle undergoes a [l,5]sigmatropic shift resulting in 3,4-dihydro-1,2,4-triazine 83, which loses a molecule of pyrrolidine to yield the product 54. This mechanism was supported by the isolation of the key intermediates for the first time in such reactions—the products of the sigmatropic shift in the open-chain tautomeric form of tiiazahexa-triene 84. The structure of the latter was established by NMR spectroscopy and X-ray analysis. In spite of its open-chain character, 84 can be easily aromatized by refluxing in ethanol to form the same product 54 (99TL6099). 

It was stated that tertiary amines 304 derived from pyrrolidines [R = alkyl, benzyl, SiMcs, Si(t-Bu)2Me] add very efficiently (yields up to 94%) to (5R)-5-menthyloxy-2(5//)-furanone 170 under photosensitized conditions to give the isomeric adducts 305 and 306 (Scheme 82) (99TL3169). 

The acetate (1) and its mosylate analog (79) have been shown to undergo cydoad-dition with the CN double bond of alkyl imines to generate substituted pyrrolidines in the presence of nickel or palladium catalyst [35]. For example, both the phenyl imine (80) and the diazene (81) gave reasonable yields of adducts (82) and (83) respectively (Scheme 2.23). 

Substituted TMMs also participate smoothly in imine cycloaddition to generate more structurally elaborate pyrrolidines. The regioselectivity of these reactions is similar to that of olefin addition, although subsequent isomerization of the initial adduct is often observed. For example, the cyano system produced the thermody-... 

A novel ring closure was discovered by Stork (6) in which the pyrrolidine enamine of a cycloalkanone reacts with acrolein. The scheme illustrates the sequence in the case of 1-pyrrolidino-l-cyclohexene, and the cyclopentane compound was found to undergo the reaction analogously. The procedure details the preparation of the bicyclo adduct and its cleavage to 4-cyclooctenecarboxylic acid. 

The net effect of the Stork reaction is the Michael addition of a ketone to an cn/3-unsaturated carbonyl compound. For example, cyclohexanone reacts with the. cyclic amine pyrrolidine to yield an enamine further reaction with an enone such as 3-buten-2-one yields a Michael adduct and aqueous hydrolysis completes the sequence to provide a 1,5-diketone (Figure 23.8). 

Ideal starting materials for the preparation of. svn-aldols are ketones that can be readily deprotonated to give (Z)-enolates which are known to give predominantly yyu-adducts. Thus, when (5,)-1-(4-methylphenyl)sulfonyl-2-(l-oxopropyl)pyrrolidine is treated with dibutylboryl triflate in the presence of diisopropylethylamine, predominant generation of the corresponding (Z)-boron enolate occurs. The addition of this unpurified enolate to 2-methylpropanal displays not only simple diastereoselectivity, as indicated by a synjanti ratio of 91 9, but also high induced stereoselectivity, since the ratio of syn- a/.vyn-lb is >97 3. 

Use of the valine derived (4S )-3-acetyl-4-isopropyl-1,3-oxazolidine (8)92, the C2-symmetric reagents (2.5,55)-l-acetyl-2,5-bissubstituted pyrrolidine 994, or the doubly deprotonated acetyl urea /V-acetyl- V..V -bis[(.S)-l-phcnylethyl]urea (10), also does not lead to sufficient induced stereoselectivity combined with acceptable chemical yield. When the acetyl urea enolate is reacted with aliphatic and aromatic aldehydes, the diastereomeric adducts (ratios ranging from 1 1 to 3 1) may be separated by column chromatography to give ultimately both enantiomers of the 3-hydroxy acids in 99% ee110. 

The naphthyl derived ligand, (5)-1-mcthyl-2-[(l-naphthylamino)methyl]pyrrolidine (4) is especially effective in the stereoselective additions of (Z)-l-cthylthio-l-trimethylsilyloxy-l-propene to aldehydes. Thus, quantitative formation of. yyn-adducts is achieved, in addition to high reagent-induced stereoselectivity (>98% ee for the 3-hydroxy thioester products)23 32. 

The use of hydrazone or enamine derivatives of ketones or aldehydes offers the advantage of stcreocontrol via chelated azaenolates. Extremely useful synthetic methodology, with consistently high anti selectivity, has been developed using azaenolates based on (S)- or (R)-l-amino-2-(methoxymethyl)pyrrolidine (SAMP or RAMP)51 58 (Enders method, see Section 1.5.2.4.2.2.3.). An example which illustrates the efficiency of this type of Michael addition is the addition of the lithium azaenolate of (5 )-l-amino-2-(methoxymethyl)pyrrolidine (SAMP) hydrazone of propanal (R = II) to methyl (E )-2-butenoate to give the nub-isomer (an 1 adduct) in 80% yield with a diastereomeric ratio > 98 2,... 

To a stirred solution of 1.5 mmol of LDA in 3.5 mL of a 60 40 mixture of THF/hexane at — 78 °C tinder a nitrogen atmosphere are added 209 mg (1.5 mmol) of l-(l-oxo-2-butenyl)pyrrolidine in 1.5 mL of HMPA. After 30 min 86 mg (0.75 mmol) of ethyl ( )-2-butenoate in 1.5 mL of THF is added and the mixture is stirred for an additional half hour at — 78CC. The mixture is quenched by addition of sat. aq NH4C1. Extraction with diethyl ether is followed by drying over Na2S04, followed by evaporation of the solvent and short path distillation to give the syn-adduct yield 123 mg (65%). 

Hepatite Virus NS3/4A having the pyrrolidine-5,5-trans-lactam skeleton [83], starting from (R)- and (S)-methionine, respectively. The key step is the addition of the proper silyl ketene acetal to an iminium ion, e.g., that generated by treatment of the intermediate 177 with boron trifluoride, which provided the adduct 178 with better diastereoselectivity than other Lewis acids. Inhibitors of hepatitis C virus NS3/4A were efficiently prepared by a similar route from (S)-methionine [83]. The addition of indole to a chiral (z-amino iminium ion was a completely diastereoselective step in a reported synthesis of tilivalline, a natural molecule which displays strong cytotoxicity towards mouse leukemia L 1210 [84]. 

The enantioselectivity is due to the retention of the chiral sparteine in the lithiated reagent. The adducts have been used to synthesize a number of pyrrolidine and piperidine derivatives. 

Valence Isomerization of the 2-Thiabicyclo[3.2.0]heptadiene Moiety In principle, a valence isomerization of thiabicyclo[3.2.0]heptadiene skeleton would lead to a thiepin ring system. Wynberg et al. 23) reported that the photochemical adduct (28) from benzo[6]thiophene and dimethyl acetylenedicarboxylate was not thermally stable. When heated in diglyme, it loses sulfur to give dimethyl 1,2-naphthalenedicarboxylate. This reaction presumably proceeds via ring opening of 28 to 2,3-dimethoxycarbonylbenzo[6]thiepin (29) which readily eliminates sulfur. This synthetic route was successfully applied to the reaction of electron-deficient acetylenes with enamines of 2,3-dihydrobenzo[fe]thiophen-3-ones in which the enamine moiety constitutes part of a thiophene system. When 3-pyrrolidin-l-yl-benzo[6]thiophene (30) was allowed to react with dimethyl acetylenedicarboxylate... 

Another example illustrating the versatility of 1,3-DC reactions is concerned with the reaction of [36]octaphyrin 71 with azomethine ylide generated in the usual way from N-methylglycine and paraformaldehyde, to give mono- and bis-pyrrolidine-fused adducts 72 and 73 (Scheme 25) <06OLl 169>... 

The reaction of 5-[2-(iV,./V-dimethylamino)ethyl]-l,2,4-oxadiazole with methyl iodide forms the quaternary ammonium salt 170 (Scheme 22), which undergoes elimination in the presence of base (diisopropylethylamine (DIEA), TEA, l,8-diazabicyclo[4.3.0]undec-7-ene, etc.) to form an intermediate 5-vinyl-l,2,4-oxadiazole 171, which undergoes in situ Michael addition with nucleophiles to furnish the Michael adducts 172. As an example, also shown in Scheme 22, 3-hydroxy-pyrrolidine allows the synthesis of compound 172a in 97% yield. Mesylation followed by deprotonation of the 1,2,4-oxadiazole methylene at C-5 enables Sn2 displacement of the mesylate to give the 5-azabicycloheptyl derivative 173, which is a potent muscarinic agonist <1996JOC3228>. 

---