Protecting group ketals

Removal of the ketal protecting groups, followed by oxidation with sodium dichromate ia acetic acid gave... 

Pos twe-Tone Photoresists. The ester, carbonate, and ketal acidolysis reactions which form the basis of most positive tone CA resists are thought to proceed under specific acid catalysis (62). In this mechanism, illustrated in Figure 22 for the hydrolysis of tert-huty acetate (type A l) (63), the first step involves a rapid equihbrium where the proton is transferred between the photogenerated acid and the acid-labile protecting group ... 

As chemists proceeded to synthesize more complicated stmctures, they developed more satisfactory protective groups and more effective methods for the formation and cleavage of protected compounds. At first a tetrahydropyranyl acetal was prepared, by an acid-catalyzed reaction with dihydropyran, to protect a hydroxyl group. The acetal is readily cleaved by mild acid hydrolysis, but formation of this acetal introduces a new stereogenic center. Formation of the 4-methoxytetrahy-dropyranyl ketal eliminates this problem. 

The cleavage proceeds by initial reduction of the nitro groups followed by acid-catalyzed cleavage. The DNB group can be cleaved in the presence of allyl, benzyl, tetrahydropyranyl, methoxy ethoxy methyl, methoxymethyl, silyl, trityl, and ketal protective groups. 

Cyclic carbonates and cyclic boronates have also found considerable use as protective groups. In contrast to most acetals and ketals the carbonates are cleaved with strong base and sterically unencumbered boronates are readily cleaved by water. 

In the following example the acetonide protective group is selectively converted to one of two t-butyl groups. The reaction appears to be general, but the alcohol bearing the t-butyl group varies with structure.Benzyli-dene ketals are also cleaved. 

BCI3, 100% yield. This reagent also cleaves a number of other ketal-type protective groups. ... 

The use of protecting groups other than ketals appears to have been rather limited. The Merck group introduced the use of semicarbazones. 

The dimethyl ketal function (51) is one of the most suitable base stable protecting groups for saturated 5a- and 5/i-3-ketones. It is formed by reaction of the ketone (50) with methanol in the presence of a suitable catalyst. Good selectivity can also be achieved with this group since 2-, 6-, 11-, 12-, 17- and 20-ketones do not form dimethyl ketals under these conditions. The 2-ketone is converted in part to the dimethyl ketal in the presence of homogeneous rhodium catalyst. "" y -Toluenesulfonic acid is the catalyst of... 

Enol ethers of saturated 3-ketones are not usually obtained directly from the ketone and therefore are of little importance as protective groups. However, enol ether (52) has been used instead of the bulkier 3-dimethyl ketal to protect the 3-ketone during angular methylation to (53). ... 

Cross-conjugated dienones are quite inert to nucleophilic reactions at C-3, and the susceptibility of these systems to dienone-phenol rearrangement precludes the use of strong acid conditions. In spite of previous statements, A " -3-ketones do not form ketals, thioketals or enamines, and therefore no convenient protecting groups are available for this chromophore. Enol ethers are not formed by the orthoformate procedure, but preparation of A -trienol ethers from A -3-ketones has been claimed. Another route to A -trien-3-ol ethers involves conjugate addition of alcohol, enol etherification and then alcohol removal from la-alkoxy compounds. 

C-17 protecting group e.g., cycloethylene ketal) is usually favored when selective hydrolytic conditions are employed. ... 

Reduction with sodium borohydride without protecting groups, 92 Reductive deacetoxylation of ll-keto-12/3-hydroxytigogenin diacetate, 53 Reductive methylation of the 3-ethylene ketal of pregna-5, 16-diene-3, 20-dione, 54... 

It is possible to change the stereochemical result of the alkylation by replacing the 3-ketal protecting group with a A -enol ether. This structural change eliminates a severe 1,3-diaxial interaction to a-face methylation and results in the formation of the 5a-methyl steroid (15) in about 35% yield, ... 

Removal of the ketal protecting group then permits... 

Tn general. Nelson and Schut s procedure is recommended for expansion of an unsymmetrically substituted cyclohexanone (for example, the A ring of a steroid 3-ketone). The yield is satisfactory in most instances and the precursors are readily available. However, the relative proportions of the two possible ketones may change as substituents are varied. The procedure is applicable to systems with additional ketones protected as ketals, double bonds, ethers and hydroxyl groups. 

From intermediate 12, the path to key intermediate 7 is straightforward. Reductive removal of the benzyloxymethyl protecting group in 12 with lithium metal in liquid ammonia provides diol 27 in an overall yield of 70% from 14. Simultaneous protection of the vicinal hydroxyl groups in 27 in the form of a cyclopentanone ketal is accompanied by cleavage of the tert-butyldimethylsilyl ether. Treatment of the resultant primary alcohol with /V-bromosuccini-mide (NBS) arid triphenylphopshine accomplishes the formation of bromide 7, the central fragment of monensin, in 71 % yield from 27. 

---