Profile mold

Another consideration is the ability of a material to provide a surface that is compatible with the requirements of the application a smooth finish for extruded profiles, molded-in colors, textured surfaces, etc. The compatibility of the major processes with in-mold coating and other insert-surfacing materials, and their compatibility with surface decoration secondary processes, could also be important. 

Also for duroplastics the ultra-high molecular polymers lack free-flowing characteristics The powdered raw material, with lubricant is condensed and rammed through the heated profile mold... 

An exemplary phenomenmi of practical relevance in which the viscoelastic behavior of plastic melts plays a rheological role is expansion of the extruded mass (die swell) when melt flows freely out of an extrusion die (profile molding tool). 

Chem. Descrip. Aluminum hydroxide CAS 21645-51-2 EINECS/ELINCS 244-492-7 Uses Eiller, flame retardant for polyester resins (SMC, BMC, laminates), epoxy and acrylic resins, crosslinked elastomers (conveyor belts, cables, profiles, molded parts), latexes (wall paper, carpetbacking), thermoplastics and thermoplastic elastomers (PP, PE and copolymers, EVA), PVC... 

Uses Filler, mar resist, aid, gloss aid for paints containing soivs., povird. coatings filler for plastics (rigid PVC extrusion, rigid PVC foam extrusion, plasticized PVC, cables, calendered sheet, profiles, moldings, PE/ XPE), rubber, plastics... 

Compounds of PVC based on oiganotin stabilizers are used in potable water pipe, siding, interior and exterior profiles, molded fittings, bottles, sheet, and FDA approved food contact applications. 

The addition of certain high Tg polymeric additives tend to reduce shrinkage and actually undergo phase separation in a similar manner as observed in styrene-unsaturated polyester low-profile molding resin technologies (5). 

Polylite Profile, Mold-making resin, Reichhold Polylube, PTFE micropowder. Custom Compounding, A Div. of Dyneon LLC Polyman, ABS alloys, Schulman, A., Inc. Polymeric Series Foams, Synthetic rubber substitute, Gaska-Tape Inc. 

Profiles can be manufactured with static pressing units (autoclave, upper ram press) as well as with semicontinuous or continuous units. Semicontinuous systems, like intermittent compression molding, enable the manufacture of continuous profiles. A distinction has to be made if the profile is open or closed. Open continuous profiles like U-, and triple V-profiles, can be manufactured with simple molds whereas the manufacture of closed profiles (e.g., double 1-profile or rectangular hollow profile) can only be realized with an increased mold complexity. Figure 1.218 illustrates a profile mold for the manufacture of open double-V profiles. This mold consists of... 

FIGURE 1.218 Profile mold for continuous manufacturing of Double-V profiles on hot presses for intermittent compression... 

Product Carrier addition, phr film amides profiles moldings... 

The mold filling speeds used with PPVC need to be relatively slow as excessive shear can cause the material to degrade or its use will effect the surface finish of the molding (i.e. splash/mica marks or surface delamination). Profiled mold filling speeds are often used to produce components which require a good surface gloss. 

---