Pressure drop of gas

APl = pressure drop of liquid phase only (psi/element) APq = pressure drop of gas phase only (psi/element)... [Pg.607]

It is noted that the total pressure drop over a bend includes contributions from both the gas and particle phases. The pressure drop of gas over a bend, ApBg, can be estimated by [Ito, 1959 1960]... [Pg.474]

APG/lOOft =pressure drop of gas if flowing alone in the pipe (psi/100 ft) APT/lOOft = pressure drop of the two-phase mixture in straight pipe (psi/100 ft)... [Pg.181]

The head of liquid required to overcome the pressure drop of gas on a dry tray, h p, can be measured experimentally or estimated (Ludwig, 1995) from... [Pg.401]

Warnier MJF, De Croon MHJM, Rebrov EV, Schouten JC. Pressure drop of gas-liquid Taylor flow in round micro capillaries for low to intermediate Reynolds numbers. Microfluid. Nanofluid. 2010 8(1) 33-45. [Pg.229]

Pressure drop of gas mixture through fixed bed can be calculated according to Eugen formula, expressed by differential equations as ... [Pg.169]

In this study, the Ergun equation has been proposed to calculated pressure drop. The results are in the inverse proportional to the bed permeability. As shown in Ergun equation, the pressure drop of gas flow velocity across the packed bed is dependent on the bed properties including voidage, mean particle diameter and the particle shape. [Pg.652]

Rgure 12-13. Correlation for estimating friction factor and pressure drop coefficient for use in calculation of pressure drop of gas flowing through beds of granular adsorbents. DataofUOP(miB)... [Pg.1053]

Rgure 12-14. Pressure drop of gas flowing through adsorbent beds at elevated pressures. Specific gravity of gas, 0.677. Data ofCappell(l944)... [Pg.1054]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...