Power failures, battery backup

Instrument Power - Instrument power failures are evaluated on a basis similar to that described for a power failure. Included in the normal considerations for PR sizing should be the failure of power supply to all instruments in and controlled from a single bus bar. Reliability feahires should include secondary selective power supply to control rooms, with emergency generator or battery backup for critical instruments and control computers. Critical controls should be able to continue operation independently of control computers. 

Check for existence of business continuity plans, including recovery after a catastophe Verify battery backup and UPS cut-in upon a power failure... 

Where there was an electric field applied, the advance of the pollutant had been reduced significantly. The power failure due to the lack of light/battery backup meant that the integrity of the barrier was not maintained for 34% of the test. 

ArxCis-NV is also environmentally conscious. It is a safe and green product that requires no toxic battery disposal. Figure 8.2 shows a DDRS ArxCis-NV module that combines supercapacitor DRAM and flash memory to deliver a persistent memory solution that saves critical data from power failures. The circuit in Figure 8.1 shows a supercapacitor-based power backup system using the LTC3625 charger. The system is also fitted with an automatic power... 

The battery life in some laptop computers is a consideration. Some laptop batteries may last long enough to perform calibration and application some may not. Additionally, there may be unforeseen circumstances that may require longer access to the laptop or that may cause premature battery failure. In order to ensure that data are not lost, a source of backup power, such as a spare battery or an adapter that plugs into the vehicle cigarette lighter, should be available. 

Backup power supply in case of battery failure. 

The easy removeability provision is also specified in the 1996 legislation and was an early requirement in several of the state NiCd battery recycling laws. These provisions were developed at the time when many NiCd battery power tools and appliances did not provide for easy removeability, mainly as a consumer safety measure. Since the early 1990s, however, battery operated tools, appliances and other devices have been designed so that in most cases the batteries are easily removable while still ensuring consumer safety. In fact, many manufacturers of battery powered tools today market replacement battery packs, which are interchangeable in a number of different tools. Only in certain systems such as computer memory backup and medical devices are the batteries permanently installed to avoid system failure. 

---