Polythiophenes, properties conductivity

AppHcations of polythiophenes being considered utilize either the electrical properties of the doped conducting state with either anionic or cationic... 

The development of polythiophenes since the early 1980s has been extensive. Processible conducting polymers are available and monomer derivathation has extended the range of electronic and electrochemical properties associated with such materials. Problem areas include the need for improved conductivity by monomer manipulation, involving more extensive research using stmcture—activity relationships, and improved synthetic methods for monomers and polymers alike, which are needed to bring the attractive properties of polythiophenes to fmition on the commercial scale. 

Here we introduce a personal point of view about the interactions between conducting polymers and electrochemistry their synthesis, electrochemical properties, and electrochemical applications. Conducting polymers are new materials that were developed in the late 1970s as intrinsically electronic conductors at the molecular level. Ideal monodimensional chains of poly acetylene, polypyrrole, polythiophene, etc. can be seen in Fig. 1. One of the most fascinating aspects of these polymeric... 

Figure 5. Cyclic voltammograms of (a) 2,5"" -di-methyl-a-hexathiophene and (b) poly(2,2 -bithio-phene) films in acetonitrile containing 0.1 M E NCIO 103 (Reprinted from G. Zotti, G. Schia-von, A. Berlin, and G. Pagani, Electrochemistry of end-ca )ed oligothienyls-new insights into the polymerization mechanism and the charge storage, conduction and capacitive properties of polythiophene, Synth. Met. 61 (1-2) 81-87, 1993, with kind permission from Elsevier Science S.A.)...

Besides synthesis, current basic research on conducting polymers is concentrated on structural analysis. Structural parameters — e.g. regularity and homogeneity of chain structures, but also chain length — play an important role in our understanding of the properties of such materials. Research on electropolymerized polymers has concentrated on polypyrrole and polythiophene in particular and, more recently, on polyaniline as well, while of the chemically produced materials polyacetylene stih attracts greatest interest. Spectroscopic methods have proved particularly suitable for characterizing structural properties These comprise surface techniques such as XPS, AES or ATR, on the one hand, and the usual methods of structural analysis, such as NMR, ESR and X-ray diffraction techniques, on the other hand. 

As might be expected, the properties of polythiophene show many similarities with those of polypyrrole. As with polypyrrole, polythiophene can be prepared via other routes than electrochemical oxidation both as the neutral material [390-392] or in the p-doped form [393]. This material is produced as an infusible black powder which is insoluble in common solvents (and stable in air up to 360°C), with conductivities ranging from approximately 10 11 Scm-1 in the neutral form [390] to 102 Scm-1 when doped [19, 393, 394]. Early work on thiophene polymers showed that the p-doped material is air-sensitive in that the conductivity decreases on exposure to the atmosphere [20, 395] although no evidence of oxygen-containing species was seen in XPS measurements [19],... 

The synthesis of poly(isothianapthene) (PITN) is an example of the second generation of conducting polymers, which have been prepared in order to produce a material with specific properties. Given the two inequivalent structures of polythiophene which give... 

In this article we report the synthesis and electrochemical properties of the polymer derived from oxidation of X, poly(I), and the characteristics of a microelectrochemical transistor based on the polymer. Poly(I), which is formed by electrochemical oxidation of X, Equation 1, consists of a conducting polymer backbone, polythiophene. 

Electrochemical oxidation of X produces a polymer film with polythiophene as the backbone and viologen centers as pendant redox groups. The electrochemical properties of the polymer are the combination of polythiophene and viologen. Using viologen subunits as the internal standard (one per repeat unit of the polymer), the "doping level" of the oxidized polythiophene backbone at its maximum conductivity can be measured and is about 25%. The charge transport via the pendant V2+/+ of poly(l) has been studied by... 

The soluble polythiophenes are the first conducting polymers that can be taken above their glass transition without decomposition and it will be interesting to study morphology-property relationships. Heeger et al.262) have recently described conformational changes in solutions of poly-3-hexylthiophene which seem to involve a coil-helix transformation as the temperature is decreased or a poor solvent is added. 

Polymer science is underdeveloped in terms of descriptions of the structure and properties of stiff-chain polymers. The conducting polymers fall mostly within this blind spot. They also present a number of novel possibilities such as the conversion from a flexible-chain precursor to a rigid-chain polymer, and the conversion between doped and undoped states in the soluble polythiophenes. Likewise, solid-state physics has yet really to tackle the transport of electrons in, and between, disordered, twisted chains. For each of the disciplines involved, the explosion of interest in conducting polymers has brouht a host of new question and new ideas. The process is far from over. 

The cation radicals of terthiophene 18 reversibly dimerize even at low concentration (92JA2728). As a consequence, 71-dimers and 7r-stacks deserve attention as entities responsible for the properties of oxidized polythiophene and other conducting polymers. 

---