Polystyrene sensitivity

Fukumura, H., Mibuka, N., Eura, S., Masuhara, H. and Nishi, N. (1993) Mass spectrometric studies on laser ablation of polystyrene sensitized with anthracene. J. Phys. Chem., 97, 13761-13766. 

Experimental investigations of the model system of dye molecules adsorbed onto surfaces of polystyrene spheres have finuly established the sensitivity and surface specificity of the SHG method even for particles of micrometre size [117]. The surface sensitivity of die SHG process has been exploited for probing molecular transport across the bilayer in liposomes [118], for measurement of electrostatic potentials at the surface of small particles [119] and for imaging... 

When either of the reactants is sensitive to mineral acids, the esterification can often be successfully accomplished with the aid of a cation exchange resin (hydrogen form) in the presence of benzene. Zeo-Karb 225/H, a unifunctional sulphonated polystyrene resin in the hydrogen form, may be used. Thus good yields of isopropyl lactate may be obtained ... 

Carbanions stabilized by phosphorus and acyl substituents have also been frequently used in sophisticated cyclization reactions under mild reaction conditions. Perhaps the most spectacular case is the formation of an ylide from the >S-lactam given below using polymeric Hflnig base (diisopropylaminomethylated polystyrene) for removal of protons. The phosphorus ylide in hot toluene then underwent an intramolecular Wlttig reaction with an acetyl-thio group to yield the extremely acid-sensitive penicillin analogue (a penem I. Ernest, 1979). 

Other Plastics Uses. The plasticizer range alcohols have a number of other uses in plastics hexanol and 2-ethylhexanol are used as part of the catalyst system in the polymerization of acrylates, ethylene, and propylene (55) the peroxydicarbonate of 2-ethylhexanol is utilized as a polymerization initiator for vinyl chloride various trialkyl phosphites find usage as heat and light stabHizers for plastics organotin derivatives are used as heat stabHizers for PVC octanol improves the compatibHity of calcium carbonate filler in various plastics 2-ethylhexanol is used to make expanded polystyrene beads (56) and acrylate esters serve as pressure sensitive adhesives. 

Gun Propellents. Low sensitivity gun propeUants, often referred to as LOVA (low vulnerabUity ammunition), use RDX or HMX as the principal energy components, and desensitizing binders such as ceUulose acetate butyrate or thermoplastic elastomers (TPE) including poly acetal—polyurethane block copolymers, polystyrene—polyacrjiate copolymers, and glycidyl azide polymers (GAP) to provide the required mechanical... 

Other apphcations of sodium bromide iaclude use ia the photographic iadustry both to make light-sensitive silver bromide [7785-23-1] emulsions and to lower the solubiUty of silver bromides during the developing process use as a wood (qv) preservative in conjunction with hydrogen peroxide (14) as a cocatalyst along with cobalt acetate [917-69-1] for the partial oxidation of alkyl side chains on polystyrene polymers (15) and as a sedative, hypnotic, and anticonvulsant. The FDA has, however, indicated that sodium bromide is ineffective as an over-the-counter sleeping aid for which it has been utilized (16). 

Polystyrene (PS). Common appHcations include packaging, food containers, and disposable tableware toys furniture, appHances, television cabinets, and sports goods and audio and video cassettes. For some of these appHcations, PS is modified by blending or graft polymerization with SBR to form impact polystyrene, which is less sensitive to breakage. Expandable polystyrene is widely used in constmction for thermal insulation. 

The glass-transition temperature in amorphous polymers is also sensitive to copolymerization. Generally, T of a random copolymer falls between the glass-transition temperatures of the respective homopolymers. For example, T for solution-polymerized polybutadiene is —that for solution-polymerized polystyrene is -HlOO°C. A commercial solution random copolymer of butadiene and styrene (Firestone s Stereon) shows an intermediate T of —(48). The glass-transition temperature of the random copolymer can sometimes be related simply as follows ... 

PL can be used as a sensitive probe of oxidative photodegradation in polymers. After exposure to UV irradiation, materials such as polystyrene, polyethylene, polypropylene, and PTFE exhibit PL emission characteristic of oxidation products in these hosts. The effectiveness of stabilizer additives can be monitored by their effect on PL efficiency. 

An important subdivision within the thermoplastic group of materials is related to whether they have a crystalline (ordered) or an amorphous (random) structure. In practice, of course, it is not possible for a moulded plastic to have a completely crystalline structure due to the complex physical nature of the molecular chains (see Appendix A). Some plastics, such as polyethylene and nylon, can achieve a high degree of crystallinity but they are probably more accurately described as partially crystalline or semi-crystalline. Other plastics such as acrylic and polystyrene are always amorphous. The presence of crystallinity in those plastics capable of crystallising is very dependent on their thermal history and hence on the processing conditions used to produce the moulded article. In turn, the mechanical properties of the moulding are very sensitive to whether or not the plastic possesses crystallinity. 

Polycarbonate is perhaps the most notoriously notch-sensitive of all thermoplastics, although nylons arc also susceptible to ductileAjrittle transitions in failure behaviour caused by notch sharpening. Other plastics such as acrylic, polystyrene and thermosets are always brittle - whatever the crack condition. 

The theory of radiation-induced grafting has received extensive treatment. The direct effect of ionizing radiation in material is to produce active radical sites. A material s sensitivity to radiation ionization is reflected in its G value, which represents the number of radicals in a specific type (e.g., peroxy or allyl) produced in the material per 100 eV of energy absorbed. For example, the G value of poly(vinyl chloride) is 10-15, of PE is 6-8, and of polystyrene is 1.5-3. Regarding monomers, the G value of methyl methacrylate is 11.5, of acrylonitrile is 5.6, and of styrene is >0.69. 

A recent development is the finishing of polystyrene chips for packaging sensitive goods to avoid electrostatic charging. 

Polystyrene-PDMS block copolymers4l2), and poly(n-butyl methacrylate-acrylic acid)-PDMS graft copolymers 308) have been used as pressure sensitive adhesives. Hot melt adhesives based on polycarbonate-PDMS segmented copolymers 413) showed very good adhesion to substrates with low surface energies without the need for surface preparation, such as etching. 

Another useful, and quite sensitive, test is the initiation of polymerisation (c/ p. 320). Polymerisation can be initiated, in suitable substrates, by cations and anions as well as by radicals, but the effect of these several species can be differentiated by using a 50/50 mixture of phenylethene (styrene), PhCH=CH2, and methyl 2-methyl-propenoate (methyl methacrylate), CH2=C(Me)C02Me, as substrate cationic initiators are found to produce polystyrene only, anions polymethyl methacrylate only, while radicals produce a copolymer containing equal amounts of the two monomers. 

---