Polymer Abbreviation Definitions

This text and others use abbreviations for most resin types. The common resin definitions are presented beiow. 

GPPS generai purpose poiystyrene or crystai ciear poiystyrene 

6 poiyamide made from hexamethyienediamine and adipic acid 

PC/ABS a physicai biend of poiycarbonate and acryionitriie-butadiene-styrene terpoiymer 

---

A Macromolecular Division of lUPAC was created in 1967, and it created a permanent Commission on Macromolecular Nomenclature, parallel to the other nomenclature commissions. The Commission over the years has issued recommendations on basic definitions, stereochemical definitions and notations, stmcture-based nomenclature for regular single-strand organic polymers and regular single-strand and quasisingle-strand inorganic and coordination polymers, source-based nomenclature for copolymers, and abbreviations for polymers. AH of these are coUected in a compendium referred to as the lUPAC Purple Book (99). 

A substantial number of definitions in the terminology section are either of physical quantities or are expressed mathematically. In such cases, there are recommended symbols for the quantities and, when appropriate, corresponding SI units. Other terms have eommon abbreviations. The following format is used to indicate these essential eharaeteristics name of term (abbreviation), symbol, SI unit unit. Typical examples are tensile stress, interpenetrating polymer network (IPN). If there are any, alternative names or synonyms follow on the next line, and the definition on the sueeeeding lines. 

Before reviewing in detail the fundamental aspects of elastomer blends, it would be appropriate to first review the basic principles of polymer science. Polymers fall into three basic classes plastics, fibers, and elastomers. Elastomers are generally unsaturated (though can be saturated as in the case of ethylene-propylene copolymers or polyisobutylene) and operate above their glass transition temperature (Tg). The International Institute of Synthetic Rubber Producers has prepared a list of abbreviations for all elastomers [3], For example, BR denotes polybutadiene, IRis synthetic polyisoprene, and NBR is acrylonitrile-butadiene rubber (Table 4.1). There are also several definitions that merit discussion. The glass transition temperature (Tg) defines the temperature at which an elastomer undergoes a transition from a rubbery to a glassy state at the molecular level. This transition is due to a cessation of molecular motion as temperature drops. An increase in the Tg, also known as the second-order transition temperature, leads to an increase in compound hysteretic properties, and in tires to an improvement in tire traction... 

This book hopefully retains only a portion of the problems which have complicated its organization. These have included literature variations in definitions and in polymer nomenclature such as the names for the nylons. As a key for the reader, we have provided a glossary of terms for symbols, abbreviations, and for polymer identification. 

The two classes of non-viral vector that are being investigated most actively are the cationic lipid-based vectors and the cationic polymer-based vectors. The cationic polymer-based vectors represent the newest class of non-viral delivery system to be developed and there are a number of groups working with these vectors. As this is such a new area of research there has yet to be any standardised definition of the terms involved in this field. Complexes formed between cationic polymers and DNA have been referred to as interpolyelectrolj1 e complexes, molecular conjugates, polylysine-DNA complexes, DNA-polylysine complexes, polyplexes and so on. In this review complexes formed between poly-(L-lysine) (pLL) and DNA are referred to as polylysine/DNA complexes or abbreviated to pLL/DNA complexes. Where polymers other dian poly(L-lysine) have been used the term polymer/DNA complex is used. The forward slash (/) is used to denote a non-covalent interaction, while a hyphen (-) is used to denote a covalent link. 

---