Polycarbosilane polymer-ceramic transformations

The cyclotrisilazane (R = Me) produced in reaction (14) is recycled at 650°C [by reaction with MeNHo) the reverse of reaction (14)] to increase the yield of processible polymer. Physicochemical characterization of this material shows it to have a softening point at 190°C and a C Si ratio of 1 1.18. Filaments 5-18 pm in diameter can be spun at 315°C. The precursor fiber is then rendered infusible by exposure to air and transformed into a ceramic fiber by heating to 1200°C under N2- The ceramic yield is on the order of 54% although, the composition of the resulting amorphous product is not reported. The approach used by Verbeek is quite similar to that employed by Yajima et al. (13) in the pyrolytic preparation of polycarbosilane and its transformation into SiC fibers. 

The other process is the transformation of an organic precursor into a continuous thin ceramic fiber. In the spinning process, polycarbosilane, a high molecular weight polymer containing Si and C, is obtained by thermal decomposition and polymerization of polydimethylsilane. The fiber thus produced consists of a mixture of P-SiC, carbon crystallite and SiO. The presence of carbon crystallite suppresses the growth of SiC crystals. Yajima and coworkers (Yajima et al., 1976, 1978, 1979) were the first to produce fine (10-30 pm in diameter), continuous and flexible fibers, which are commercialized with the trade name of Nicalon (Nippon Carbon Co.). 

Using similar procedures polycarbosilanes could be obtained which were transformed into nearly stoichiometric silicon carbide [98]. In order to obtain higher ceramic yields the precursors were thermolyzed at 300 °C for 3 h imder argon prior to pyrolysis. Crosslinking of the polymer chains occurred during the thermolysis under elimination of hydrogen and methylsilanes (Scheme 8). 

Polysilazanes have been shown to be excellent polymeric precursors to amorphous silicon carbonitride (SiCN), silicon nitride, silicon carbide (SiC) and their composites. The actual chemical and phase compositions of the ceramic products depend on the polymer composition and pyrolysis conditions, such as temperature, time and atmosphere. Polymeric silazanes consist of amorphous networks, which transform to amorphous SiCN ceramics by pyrolysis under inert atmosphere at around 1000 C. These ceramic products remain amorphous up to 1400 °C in an inert atmosphere [a.322]. However, at higher temperatures the non-stoichiometric SiCN matrix decomposes, with nitrogen loss, giving the thermodynamically stable phases, namely Si3N4 and SiC. Polysilanes, polycarbosilanes and polysilazanes are commonly used for the preparation of high-performance ceramics such as silicon carbide, silicon nitride and silicon carbonitride. 

---