Poly PDMS composites

Morphology of the anionically synthesized triblock copolymers of polyfp-methyl-styrene) and PDMS and their derivatives obtained by the selective chlorination of the hard segments were investigated by TEM 146). Samples with low PDMS content (12%) showed spherical domains of PDMS in a poly(p-methylstyrene) matrix. Samples with nearly equimolar composition showed a continuous lamellar morphology. In both cases the domain structure was very fine, indicating sharp interfaces. Domain sizes were estimated to be of the order of 50-300 A. 

The hydrophilic/hydrophobic SIN composition of PDMS with poly(HEMA) and poly(AAC) were proposed as a potential apphcation for high-permeability soft contact lenses. Other sUicone-containing IPNs for contact lenses include polymerization of MMA in the presence of polymerized methacryloxypropyl trimethoxysilane, the cross-linking of a polymeric hydrogel of a copolymer of NVP during the final compression or injection-moulding process. 

We have a specific interest in the self-assembled structures formed by poly(ferrocenylsilane) block copolymers, such as poly(ferrocenyldimethylsilane-Z -dimethyl-siloxane) (PFS-PDMS) and (ferrocenyldimethylsilane-Z>-isoprene) (PFS-PI). The PFS block contains an iron atom in the main chain repeat unit. These polymers are particularly promising for novel applications, since they can be used as charge-transport materials and, by pyrolysis, as precursors to ferromagnetic ceramics [4-6], Moreover, they can by synthesized with a very narrow molar mass distribution, with excellent control over chain length and composition [7], An important feature of PFS is that the polymers bearing two methyl groups on the silane unit are crystalline, whereas polymers with two different substituents on each silane (methyl, ethyl methyl, phenyl) are atactic and remain amorphous. This feature of the polymer composition has a strong influence on the type of self assembled structures that these poly-... 

Other examples of successful combinations of liquid chromatography and MALDI-TOF have been reported by Kruger et al. who separated linear and cyclic fractions of polylactides by LC-CC [184]. Just et al. were able to separate cyclic siloxanes from linear silanols and to characterize their chemical composition [185]. The calibration of an SEC system by MALDI-TOF was discussed by Mon-taudo et al. [186]. Poly( dimethyl siloxane) (PDMS) was fractionated by SEC into different molar mass fractions. These fractions were subjected to MALDI-TOF for molar mass determination. The resulting peak maximum molar masses were... 

Polymeric materials are still the most widely used membranes for gas separation, and for specific apphcations the separation technology is well established (see Section 4.6). Producing the membranes either as composites with a selective skin layer on flat sheets or as asymmetric hollow fibers are well-known techniques. Figure 4.5 shows an SEM picture of a typical composite polymeric membrane with a selective, thin skin layer of poly(dimethyl)siloxane (PDMS) on a support structure of polypropylene (PP). The polymeric membrane development today is clearly into more carefully tailored membranes for specific... 

---