Polluting with heat Thermal pollution

The advantages of thermal incineration are that it is simple in concept, has a wide application, and results in almost complete destruction of pollutants with no liquid or solid residue. Thermal incineration provides an opportunity for heat recovery and has low maintenance requirements and low capital cost. Thermal incineration units for small or moderate exhaust streams are generally compact and light. Such units can be installed on a roof when the plant area is limited. = The main disadvantage is the auxiliary fuel cost, which is partly offset with an efficient heat-recovery system. The formation of nitric oxides during the combustion processes must be reduced by control of excess air temperature, fuel supply, and combustion air distribution at the burner inlet, The formation of thermal NO increases dramatically above 980 Table 13.10)... 

Thermal conduction (also referred to as electrical conductive heating or in situ thermal desorption) supplies heat to the soil through steel wells or with a blanket that covers the ground surface. As the polluted area is heated, the contaminants are destroyed or evaporated. Steel wells are used when the polluted soil is deep. The blanket is used where the polluted soil is shallow. Typically, a carrier gas or vacuum system transports the volatilized water and organics to a treatment system. 

The solubility of most solids increases with increasing temperature. However, the solubility of gases in liquids decreases with increasing temperature. For example, if you open a cold bottle of soda and a warm bottle of soda, more gas is released by the warm soda. This is the basis of thermal pollution, in which the solubility of oxygen in stream or lake water is decreased if the water is polluted by heat. 

In 2000, NEC developed an epoxy resin with what it describes as a fire-retardant structure that avoids the need for either TBBA or phosphorus-based flame retardants in circuit boards. The new resin contains a metal hydroxide retardant. The company claims the new board is almost totally free of pollutants, and is easy to process and thermally recycle. By also integrating flame retardant properties within the board, use of the metal hydroxide is minimised, while offering good electrical properties, higher heat resistance and improved processing characteristics. ... 

---