PMMA/CNTs nanocomposites electrical conductivity

Benoit et al. (41) obtained electrically conductive nanocomposites by dispersing SWCNT and PMMA in toluene, followed by drop casting the mixture on substrates. Thin films of SWCNT-PMMA composites for different CNT concentration were produced by spin casting by Chapelle et al. (54) and Stephan et al. (55). They characterized these nanocomposites by Raman spectroscopy to study interactions between nanotubes and PMMA and found that PMMA tends to intercalate between the CNTs thereby increasing the distance between the nanotubes in the film. 

Early, in situ radical polymerization was used for the synthesis of poly(methyl methacrylate) (PMMA)-CNT composites [82]. In situ polymerization was performed using the radical initiator 2,2-azobisisobutyronitrile(AIBN). In this reaction, p-bonds in CNTs were initiated by AIBN, and therefore nanotubes could participate in PMMA polymerization to form a strong interface between the CNT and the PMMA matrix. PA6/CNT composites have been prepared by in situ polymerization of e-caprolactam in the presence of pristine and carboxylated CNTs. The e-caprolactam monomer was found to form an electron-transfer complex with CNTs and result in a homogeneous, polymerizable solution. The final composites can be spun into PA6/CNT fibers (Fig. 7) with excellent mechanical and electrical properties [83].This method is also suitable for the fabrication of thermosetting polymer composites with nanofillers. Bauhofer et al. [84] dispersed CNTs in an epoxy solution system based on a bisphenol-A epoxy resin and an amine hardener During nanocomposite curing, electric fields were used to induce the formation of aligned conductive nanotube networks. Recently, the in situ polymerization method... 

---