Plate height adhesion

Microchannels have also been directly patterned on SU-8 photoresist [232-234,892]. Multilevel structures were fabricated using the SU-8 photoresist [232]. In another report, the SU-8 photoresist was spun (1250 rpm for 30 s) on an ITO-coated glass plate, which was first treated by an 02 plasma to increase the adhesion of SU-8 on ITO. The photoresist channel was of ribbon-like structure with triangular ends (40 pm height, 10 mm width and 90 mm length). The channel was bonded by hot-pressing to another ITO glass on top of the photoresist structures [892]. SU-8 photoresists have also been used to create multilayered... 

Influence on Cell Functions Schmidt and Von Recum tested seven different microtextured silicone surfaces for their effect on macrophage mitochondrial metabolic activity [74], Cells on some textures were metabolically more active than cells on the other textures. The ability of macrophages to respond to phorbol 12-myristate 13-acetate (PMA) stimulations was also varied by microstructures, possibly due to a structural alteration of protein kinase C [74], In another study, myocytes plated on microtextured surfaces display an increase in myofibrillar height [45], which elicits microenvironmental remodeling of proteins that mechanically attach the cell to its surroundings. But vinculin, a focal adhesion protein, was found to decrease in expression [45],... 

Forced convection can also arise from the movement of electrolyte solution over a stationary working electrode. In a channel electrode, the electrode is embedded smoothly in one wall of a thin, rectangular duct through which electrolyte is mechanically pumped [3, 6, 26, 27]. The design of the flow cell consists of two plates sealed together, with typical dimensions of 30-50 mm in length, <10 mm in width and a distance between the plates of less than 1 mm (the cell height). The electrode is embedded either at the centre of the base plate or attached to the centre of the cover plate by means of an adhesive. 

---