Plastics. Also polyvinyl ethers

The phenoxy resins can also be plasticized with many of the common plasticizers and still maintain a high percentage of strength, while the bonding temperature is substantially reduced. An effective hot-melt adhesive is one in which polyvinyl ether is blended into the phenoxy resin. 

Among the emerging pollutants of industrial origin, Bisphenol A [2,2 bis(4-hydroxydiphenyl)pro-pane] (BPA) has special relevance since it was one of the first chemicals discovered to mimic estrogens as endocrine disrupters.147 This compound was first reported by Dianin in 1891.1411 BPA is produced in large quantities worldwide, mainly for the preparation of polycarbonates, epoxy resins, and unsaturated polyester-styrene resins.149 The final products are used in many ways, such as coatings on cans, powder paints, additives in thermal paper, in dental composite fillings, and even as antioxidants in plasticizers or polymerization inhibitors in polyvinyl chloride (PVC). To a minor extent, BPA is also used as precursor for flame retardants such as tetrabromobisphenol A or tetrabromobisphenol-S-bis(2,3-dibromopropyl) ether.150 This substance can enter the environment... 

The family of FPs, also called fluorocarbon plastics, is based on polymers made of monomers composed of fluorine and carbon may also include chlorine atoms in their structure. Specific types include polytetrafluoroethylene (PTFE), polytetrafluoroethylene-cohexafluoro-propylene or fluorinated ethylene propylene (FEP), polytrafluoroethylene-coperfluoropropylvinyl ether (PFA), ethylenetetrafluoroethylene (ETFE). polychlorotrifluoroethylene (PCTFE), ethylene-chlorotri-fluoroethylene (ECTFE), polyvinylidene fluoride (PVDF), polyvinyl fluoride (PVF), perfluoromethylvinylether (PFMV), perfluoroalkoxy (PFA), etc. 

Plasticizers are most commonly liquid esters of low volatUity, which are blended into rigid thermoplastic polymers to make them soft and flexible. Most are esters of phthatic, phosphoric, and adipic acids. Major use is in polyvinyl chloride (PVC) elastoplastics. Another major use, rarely mentioned in the literature, is the addition of hydrocarbon oils to rubber to improve processability. Plasticizers are also used to improve melt processabUity and toughness of rigid plastics such as cellulose esters and ethers, and they are used in a variety of specialized apphcations. In some cases, they perform dual functions such as thermal stabilization or flame retardance. This gives the individual processor the ability to tailor properties for each produet. 

---