Phosphine complexes reactions

Several classes of discrete Ni/CS2 compounds have been prepared, usually by reaction of CS2 with Ni° phosphine complexes. Reactions of CS2, C02, and COS with Ni° complexes have been reviewed.2440 Compounds of varying stoichiometry have been obtained, depending on the phosphine used ... 

With hot water a vigorous but complex reaction occurs, the products including phosphine and phosphoric(V) acid. This disproportionation reaction can be approximately represented as ... 

Wilkinson Hyd.rogena.tion, One of the best understood catalytic cycles is that for olefin hydrogenation in the presence of phosphine complexes of rhodium, the Wilkinson hydrogenation (14,15). The reactions of a number of olefins, eg, cyclohexene and styrene, are rapid, taking place even at room temperature and atmospheric pressure but the reaction of ethylene is extremely slow. Complexes of a number of transition metals in addition to rhodium are active for the reaction. 

This is an ion-exchanger like the sulfonated polymer. The siUca surface can also be functionalized with phosphine complexes when combined with rhodium, these give anchored complexes that behave like their soluble and polymer-supported analogues as catalysts for olefin hydrogenation and other reactions ... 

Alkyl- and aryl-pyridazines can be prepared by cross-coupling reactions between chloropyridazines and Grignard reagents in the presence of nickel-phosphine complexes as catalysts. Dichloro[l,2-bis(diphenylphosphino)propane]nickel is used for alkylation and dichloro[l,2-bis(diphenylphosphino)ethane]nickel for arylation (78CPB2550). 3-Alkynyl-pyridazines and their A-oxides are prepared from 3-chloropyridazines and their A-oxides and alkynes using a Pd(PPh3)Cl2-Cu complex and triethylamine (78H(9)1397). 

Codeposition of silver vapor with perfluoroalkyl iodides at -196 °C provides an alternative route to nonsolvated primary perfluoroalkylsilvers [272] Phosphine complexes of trifluaromethylsilver are formed from the reaction of trimethyl-phosphme, silver acetate, and bis(trifluoromethyl)cadmium glyme [755] The per-fluoroalkylsilver compounds react with halogens [270], carbon dioxide [274], allyl halides [270, 274], mineral acids and water [275], and nitrosyl chloride [276] to give the expected products Oxidation with dioxygen gives ketones [270] or acyl halides [270] Sulfur reacts via insertion of sulfur into the carbon-silver bond [270] (equation 188)... 

In 1996, consumption in the western world was 14.2 tonnes of rhodium and 3.8 tonnes of iridium. Unquestionably the main uses of rhodium (over 90%) are now catalytic, e.g. for the control of exhaust emissions in the car (automobile) industry and, in the form of phosphine complexes, in hydrogenation and hydroformylation reactions where it is frequently more efficient than the more commonly used cobalt catalysts. Iridium is used in the coating of anodes in chloralkali plant and as a catalyst in the production of acetic acid. It also finds small-scale applications in specialist hard alloys. 

Dialdehydes 8 have been converted to y-lactones 9 in the presence of a rhodium phosphine complex as catalyst. The example shown below demonstrates that this reaction works also with aldehydes that contain a-hydrogen atoms. 

Guo et al. [70,71,73] recently attempted to hydrogenate NBR in emulsion form using Ru-PCy complexes. However, successful hydrogenation can only be obtained when the emulsion is dissolved in a ketone solvent (2-butanone). A variety of Ru-phosphine complexes have been studied. Crosslinking of the polymer could not be avoided during the reaction. The use of carboxylic acids or first row transition metal salts as additives minimized the gel formation. The reactions under these conditions require a very high catalyst concentration for a desirable rate of hydrogenation. 

Syntheses of some of these important tertiary phosphine complexes are summarized in Figure 1.60, which represent reactions typical of a tertiary phosphine (e.g. PMe2Ph), showing complexes in the oxidation states +6, +4, +3 and +2 [78a]. 

Phosphine complexes can be synthesized by reduction or reproportionation. Complexes of dppm are the most important and can undergo- both substitution reactions and insertions (Figure 3.19). 

The most important of the tertiary phosphine complexes of platinum(IV) are Pt(QR3)2X4, generally prepared by halogen oxidation [174] of cis- or trans-Pt(QR3)2X2 (Q = P, As, R = alkyl Q = Sb, R = Me), since direct reaction of the platinum(IV) halides with the ligands leads to reduction. Once made, the platinum(IV) compounds are stable to reduction ... 

A particularly elegant pathway to stable coordination compounds of disilenes has been found with the reaction of the Pt-phosphine complex 80 with 81 ab, which... 

Reaction with nitrile and phosphine complexes 6.5.3.1 C4 Bf3 FeGaNa 2O4 Na2[(CO)4FeGaBr3]... 

It is possible to replace one isocyanide by triphenylphosphine, or to replace two isocyanides with diphos, giving phosphine analogues of these complexes. These species are not available from analogous reactions of phosphine-palladium(O) and (II) complexes. Reactions with active alkyl halides proceeds with oxidation nitric oxide also oxidizes these complexes. [Eqs. (31, 32)]. 

The reactions of silicon hydrides with low-valent phosphine complexes of Fe, Co, and Ni have led to the isolation of a number of products in some of which the silicon moiety may be present as an [SiXj] anion (177). Examples are given in Eqs. (102)-(103). Definitive confirmation of these formulations... 

A complex reaction takes place when dichlorobis(triphenylphosphine)-nickel (5) is treated with excess methylmagnesium bromide in ether. Detectable amounts of benzene, toluene, and biphenyl are formed, together with mixed phosphines. Nickel appears to be necessary for the substitution reaction since triphenylphosphine alone does not react with the Grignard reagent. 

In a Kumada-Corriu reaction, an aryl halide is oxidatively coupled with a homogeneous nickel(ll)-phosphine catalyst [2], This species reacts with a Grignard reagent to give biaryl or alkylaryl compounds. Later, palladium-phosphine complexes were also successfully applied. By this means, stereospecific transformations were achieved. 

Olefin dimerisation with Ni-NHC complexes became a topic of interest following reports of Ni(II) phosphine complexes being employed in imidazolium-based ionic liquid solvents [23, 24]. It had previonsly been established that aIkyl-Ni(II) complexes containing NHC ligands can rapidly decompose via imidazolium formation (Scheme 4.1) [5], and it was thus of interest to explore the effect that an excess of the imidazolinm cation would have on this reaction. 

---