Phenylboronic acid, coupling with

Methods F and G are ligandless palladium-catalysed and therefore dramatically sensitive to the presence of an oxygen [28]. Beside aryl bromides, the Pd(OAc)2 or Pd(SEt2)Cl2-catalysed SM reactions in A,iV-dimethylformamide were effectively conducted with aryl chlorides [29]. When appropriate precautions were taken, the SM cross-coupling reaction of phenylboronic acid (260) with 4-nitro-bromobenzene (168) or 4-nitro-iodobenzene (225) furnished 4-nitrobiphenyI (224) with a quantitative yield within 0.75 or 2.5 h. Scheme 16. 

The parent system 4 has also been jnepared employing a double reductive ring closure of a dinitrodiphenylbenzene derivative (Scheme 25). The required starting material, 195, was prepared using a palladium-catalyzed coupling of 1,4-dibromo-2,5-dinittobenzene with phenylboronic acid and after reaction with tri-ethylphosphite in hot tert-butylbenzene, 4 could be isolated in a moderate yield (92JHC1237). 

Remarkably, one year later Leadbeater described that biaryls can be synthesized via a Suzuki-type coupling under transition-metal free conditions [51, 52]. The reaction conditions were almost identical to those reported for the ligand-free process, with the difference being that a larger amoimt of Na2C03 and arylboronic acid were used. Only one successful example of a heteroaryl haUde substrate is shown namely, the coupling of 2-bromopyridine with phenylboronic acid (Scheme 32). 3-Bromothiophene did not couple under the same reaction conditions. Unfortimately, attempts to use heteroarylboronic acids such as 3-pyridinylboronic acid, 3-thienylboronic acid, and lH-indol-5-ylboronic acid on 4-bromoacetophenone completely failed. 

As it was shown before that conversions and selectivities can be increased, usually not at the expense of each other, it stand to reason that micro reactors provide high yields. For example, the Suzuki coupling of 4-bromobenzonitrile and phenylboronic acid gives a yield of 62% for micro-flow processing which is about six times higher than with batch processing (10%) at comparable process conditions [155]. 

The Suzuki-Miyaura synthesis is one of the most commonly used methods for the formation of carbon-to-carbon bonds [7]. As a palladium catalyst typically tetrakis(triphenylphosphine)palladium(0) has been used, giving yields of44—78%. Recently, Suzuki coupling between aryl halides and phenylboronic acid with efficient catalysis by palladacycles was reported to give yields of 83%. 

Xia and co-workers synthesised a number of Pd-NHC complexes (33, 34, 36) for carbonylative Suzuki reactions (Fig. 9.6) [41], Various aryl iodides were carbonylatively coupled (P = 1 atm) with either phenylboronic acid or sodium tetraphenylborate. All the complexes were highly active, but 33 provided the best results with >76% selectivity for ketone in all the reactions. Xia followed this work with the double carbonylation of various aryl iodides with several secondary amines using the catalysts [CuX(Mes)] (37-X) and [Cu(IPr)X] (38-X) (X = I, Br, Cl) (3 MPa, 100°C, 10 h) (Scheme 9.7) [42],... 

Pd p-nitrobromobenzene (couplings with n-butylacrylate , phenylboronic acid s, phenyltrimethyltin )... 

General procedure for Suzuki coupling. 4-Bromoanisole (125 pL, 1 mmol), phenylboronic acid (186 mg, 1.5 mmol), K2CO3 (0.55 g, 4 mmol) and the BaCei.j,Pdj,03.j, catalyst were mixed in a 20 ruL scintillation vial. A preheated 2-propanol/water solution (IPA/H2O, 1 1 v/v, 12 ruL, 80°C) was added, the vial was immediately placed on a hot plate stirrer and its temperature was maintained at (80 1) °C. The reaction mixture was stirred at 1000 rpm for 3 min, then cooled to room temperature. The 4-methoxybiphenyl product was extracted with diethyl ether (3 x 15 ruL). The organic fractions were washed with deionized water and dried with MgS04. After filtration, volatiles were removed under reduced pressure to yield the isolated product. 

Suzuki coupling reactions with aryl halides. Two as-prepared BaCei cPd c03. ( materials (x = 0.05 and 0.10) were successfully utihzed in several Suzuki coupling reactions. Both aryl iodides and aryl bromides react smoothly with 4-phenylboronic acid, eq 1, to yield the corresponding biatyls in high yields (> 95%). For both 4-bromoanisole and 4-iodoanisole, the biatyl yields reached nearly 100% in 3 min with BaCeo 95Pdoo503 5 as the catalyst, corresponding to an effective TON of ca. 2,000 and an effective TOF of nearly 50,000 h. Resnlts are smmnarized in Table 27.1. 

Figure 27.1. Kinetic profiles for the coupling of 4-bromoanisole with phenylboronic acid to yield 4-bromonaphthalene, (a) using as-prepared BaCeo95Pdoo502 95 (open circles) or BaCeo9oPdoio02 9o (filled circles) as the catalyst and (b) using BaCeo95Pdoos02 95 as-prepared (small open circles) reduced (filled circles) and reoxidized (open squares) as the catalyst. Reagents and conditions 3.0 mg catalyst (0.05 mol % Pd, X = 0.05 0.10 mol % Pd, x = 0.10), 1.0 mmol 4-bromoanisole, 1.5 mmol PhB(OH)2, 4.0 mmol K2CO3, 12 mL IPA-H2O (1 1, v/v), 80°C. Lines are drawn only to guide the eye.

Solvent effect. Several different solvent systems were investigated for the coupling of 4-bromoanisole with 4-phenylboronic acid catalyzed by BaCeo 95Pdoo50295. The resnlts are summarized in Table 27.2. A phase-transfer catalyst (Aliquat 336) was added in the experiment involving toluene/H20. However, only the IPA/H2O solvent system was effective, resulting in a biaiyl yield of 100% all other solvents gave rather low yields. 

Catalyst recycling. The solid Pd-doped perovskite catalysts are easily filtered from the reaction mixtnre for reuse. The activity of the recycled BaCco 95Pdo.o502 95 catalyst was investigated in the coupling of 4-bromoanisole with 4-phenylboronic acid. The results in Table 27.3 show that high activity was retained even after seven cycles of catalyst use. 

By utilizing a solid support-based tetradentate A-heterocyclic carbene-palladium catalyst, cross couplings of aryl bromides with phenylboronic acid were achieved in neat water under air.121 A high ratio of substrate to catalyst was also realized. 

Ternary Pd-catalyzed coupling reactions of bicyclic olefins (most often norbor-nadiene is used) with aryl and vinyl halides and various nucleophiles have been investigated intensively over the past few years [44]. A new approach in this field is to combine Heck and Suzuki reactions using a mixture of phenyliodide, phenyl-boronic acid and the norbornadiene dicarboxylate. Optimizing the conditions led to 84% of the desired biphenylnorbornene dicarboxylate [45]. Substituted phenyl-iodides and phenylboronic acids can also be used, though the variation at the norbornadiene moiety is highly limited. 

Recently, Larock and coworkers used a domino Heck/Suzuki process for the synthesis of a multitude of tamoxifen analogues [48] (Scheme 6/1.20). In their approach, these authors used a three-component coupling reaction of readily available aryl iodides, internal alkynes and aryl boronic acids to give the expected tetrasubsti-tuted olefins in good yields. As an example, treatment of a mixture of phenyliodide, the alkyne 6/1-78 and phenylboronic acid with catalytic amounts of PdCl2(PhCN)2 gave 6/1-79 in 90% yield. In this process, substituted aryl iodides and heteroaromatic boronic acids may also be employed. It can be assumed that, after Pd°-cata-lyzed oxidative addition of the aryl iodide, a ds-carbopalladation of the internal alkyne takes place to form a vinylic palladium intermediate. This then reacts with the ate complex of the aryl boronic acid in a transmetalation, followed by a reductive elimination. 

---