Oxygen—continued resins

Because hydrolytic reactions are reversible, they are seldom carried out in batch wise processes [26,28,36,70]. The reactor is usually a double jacket cylindrical flask fitted with a reflux condenser, magnetic stirrer, and thermometer connected with an ultrathermostat. The catalyst is added to the reaction mixture when the desired temperature has been reached [71,72]. A nitrogen atmosphere is used when the reactants are sensitive to atmospheric oxygen [36]. Dynamic methods require more complicated, but they have been widely used in preparative work as well as in kinetic studies of hydrolysis [72-74]. The reaction usually consists of a column packed with a layer of the resin and carrying a continuous flow of the reaction mixture. The equilibrium can... 

Where continuous demineralization of reactor coolant is provided, premature degradation of the strong base anion (SBA) resins may occur. To avoid this, oxygen removal by use of anion resin in the sulfite form is employed. 

Various authors have studied the ageing of triterpenoid resins to understand and possibly slow their deterioration [3, 4, 12, 13, 17 36]. The main degradation pathway is autoxida-tion, an oxidative radical chain reaction [37, 38] after formation of radicals, oxygen from the air is inserted, leading to peroxides. The peroxides can be homolytically cleaved, resulting in new radicals that continue the chain reaction. The cleavage of peroxide bonds can be induced thermally or photochemically. 

Continuous monitoring of the carbon monoxide and carbon dioxide evolved during thermal decomposition of brominated polyester resin samples, has been carried out using a simultaneous thermal analysis-mass spectrometry technique. In order to allow measurement of the carbon monoxide evolved, the atmosphere chosen for these runs was 21% oxygen in argon, since the peak at 28 atomic mass units (amu)... 

The specimen holder of an oxygen index apparatus can be coupled to a balance beam for continuous monitoring of the mass loss of the specimen during the combustion. Such an apparatus was used by Methven for studying polyester resins filled with alumina trihydrate and polyester fabrics finished with flame retardants. 

Many names have been assigned to the lactic acid bacteria associated with brewing. It is probable however that most rod-shaped isolates may be classified as the heterofermentative species Lactobacillus brevis, the homo-fermentative species . casei and L, plantarum, and the homofermentative thermophilic species L. delbrueckii [14]. Cocci are also encountered, notably the homofermentative Pediococcus damnosus. (Less common because they are more sensitive to hop resins are P. pentosaceuslacidilactici. Streptococcus saprophyticus, S. epidermis and Micrococcus varians.) Micrococcus kristinae is however resistant to hop resins and low pH, but requires oxygen for growth [15]. An American report states that many breweries encounter L. brevis, L. plantarum and P. damnosus. When the primary fermentation is complete, Pediococcus continues to grow at the bottom of the fermenter in the deposited yeast [16]. 

Another application of particular note involving SS-RTP is the technology named phosphorescence barometry, which provides an inexpensive method for continuous pressure mapping of aerodynamic and automotive surfaces. The technology makes use of a luminescent paint (pressure-sensitive paint) that consists of an oxygen permeable polymer (e.g., silicone resins) in which a phosphorescent compound, a platinum porphyrin derivative, is dispersed. A temperature-sensitive paint would be similar except that an oxygen impermeable support should be used (e.g., an epoxy resin). 

---