Other Waterside Problems in Hot Water Heating and Low-Pressure Steam Systems

4 OTHER WATERSIDE PROBLEMS IN HOT WATER HEATING AND LOW-PRESSURE STEAM SYSTEMS 

In practice, the process of periodically topping up the inhibitor formulation through a hose cock or via a timer-controlled pump works well when water losses are minimal and the boiler is clean. But as discussed previously, when excess water is lost from the system through various means and MU demands become significant, the practice becomes one of chasing your own tail, and the various common forms of waterside corrosion, sludging, and deposition rapidly develop and flourish. 

The second most common problem in HW heating systems after oxygen ingress probably is that of uncontrolled or excessive water loss. 

This specific problem often goes hand-in-hand with the associated issues of  

In many systems where oxygen pitting corrosion has taken place, it often is difficult to decide whether the ingress of causative oxygen stemmed primarily from DO in the MU water required to compensate for excessive water losses or simply overall system air-ingress, especially because these conditions tend to go hand-in-hand. 

---