Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Optimized FPL etch

Processing details for the optimized FPL etching procedure, other chromic-sulfuric acid etches and the P2 etch are summarized in Table 1 [2,62J. [Pg.965]

The method used for testing durability of adhesive bonds was developed at 3M by W.D. Sell (16) and is called "sustained load stress durability". The metal substrates were 2024T-3 clad or bare aluminum alloy, 5052T-4 bare aluminum alloy or 1010 cold rolled steel. The surface preparation for the aluminum alloys was either the "optimized" FPL-etch" or the H PO -anodization process (12). The steel was solvent wiped. If a primer was used, it was cured before application of the adhesive. Film... [Pg.632]

Figure 6.1 Adhesive strength of epoxy-aluminum joints as a function of the applied etching pretreatments (a) abrasion, (b) alkaline, (c) optimized FPL, and (d) P2 (adhesives Ceys, 2MI, PAMS, and DDS are based on diglycidyl ether of bisphenol A, Diglycidyl ether of bisphenol-A(DGEBA), and differ in composition and/or cure conditions). ... Figure 6.1 Adhesive strength of epoxy-aluminum joints as a function of the applied etching pretreatments (a) abrasion, (b) alkaline, (c) optimized FPL, and (d) P2 (adhesives Ceys, 2MI, PAMS, and DDS are based on diglycidyl ether of bisphenol A, Diglycidyl ether of bisphenol-A(DGEBA), and differ in composition and/or cure conditions). ...
See other pages where Optimized FPL etch is mentioned: [Pg.964]    [Pg.964]    [Pg.631]    [Pg.372]    [Pg.964]    [Pg.964]    [Pg.631]    [Pg.372]    [Pg.368]    [Pg.258]    [Pg.83]    [Pg.206]    [Pg.212]   
See also in sourсe #XX -- [ Pg.372 ]



SEARCH



FPL Etch

© 2024 chempedia.info