Nuclear boiler assembly

The nuclear boiler assembly consists of the equipment and instrumentation necessary to produce, contain, and control the steam power required by the turbine generator. The principal components of the nuclear boiler are as follows  

---

Nuclear Boiler Assembly. This assembly consists of the equipment and instrumentation necessary to produce, contain, and control the steam required by the turbine-generator. The principal components of the nuclear boiler are (1) reactor vessel and internals—reactor pressure vessel, jet pumps for reactor water circulation, steam separators and dryers, and core support structure (2) reactor water recirculation system—pumps, valves, and piping used in providing and controlling core flow (3) main steam lines—main steam safety and relief valves, piping, and pipe supports from reactor pressure vessel up to and including the isolation valves outside of the primary containment barrier (4) control rod drive system—control rods, control rod drive mechanisms and hydraulic system for insertion and withdrawal of the control rods and (5) nuclear fuel and in-core instrumentation,... 

A Thorium-Uranium Exponential Experltnenti C. If. Skeen and W. W. Broum(AI). Because of uncertainties in the knowledge of t nuclear properties of thorium fuel and lattices containing this fuel, an experimental study was made of a thorium based fuel that is to be loaded into the Sodium Reactor Experiment (8RB) in the near future. An exponential experiment was performed with a square-celled lattice of 7-rod elements (l-in. diameter rods) spaced 9.5 in. apart in praphite. The fuel Is a Th-U-23S alloy containing 7.6% uranium by weight which is 93.13 atomic per cent U-235. The feel elements were 5 ft. long. The subcrltical lattice was placed On thd thermal column of a water boiler reactor which served as the source of neutrons for the assembly. 

---