Nitrogen sulfide ,

Sulfur vapor and ammonia react to give ammonium sulfide and nitrogen sulfur and hquid anhydrous ammonia react to produce nitrogen sulfide... 

Nitrogen Sulfide. (Sulfur Nitride, Nitrogen Tetrasuifide). See under List of Nitride Compounds in this Vol... 

About 100 gal of process wastewater is typically generated from 1 t of coke produced.15 These wastewaters from byproduct coke making contain high levels of oil and grease, ammonia nitrogen, sulfides, cyanides, thiocyanates, phenols, benzenes, toluene, xylene, other aromatic volatile components, and polynuclear aromatic compounds. They may also contain toxic metals such as antimony, arsenic, selenium, and zinc. Water-to-air transfer of pollutants may take place due to the escape of volatile pollutants from open equalization and storage tanks and other wastewater treatment systems in the plant. 

Fig. 34. CV scans on carbon electrode, 650 °C, 500 mV/s. (a) Nitrogen, fresh MCFC membrane, (b) Nitrogen, sulfided MCFC membrane, (c) Coal gas with 1% H2S.

Thiatriazoles generally decompose upon mild heating into nitrogen, sulfur, and an organic fragment (Scheme 2). Considerable attention has been given to this reaction because of the synthetic possibilities and because of the possible involvement of intermediates such as thioacyl azides (24), thioacyl nitrenes (25), thiazirines (e.g. (34)) and nitrogen sulfide (29). 

Liquid ammonia reacts with sulfur forming nitrogen sulfide and H2S lOS -I- 4NH3 —> N4S4 + 6H2S... 

Nitrogen sulfide was first prepared by Soubeiran in 1837 by the action of ammonia on sulfur dichloride dissolved in benzene. 

Nitrogen sulfide has a density of 2.22 at 15°. It is insoluble in water, slightly soluble in alcohol and ether, somewhat more soluble in carbon disulfide and benzene. It reacts slowly with water at ordinary temperature with the formation of pentathionic... 

Nitrogen Sulfide. See in Vol 8, N102-L R under Sulfur Nitride ... 

The reactivity of the nonconjugated 1,2,3,4-thiatriazole derivatives is determined by the energy that is gained after liberation of stable fragments such as nitrogen, nitrogen sulfide, and molecular sulfur. 

Pt-Sn Pt-Re Nitrogenated, sulfided, A1203 support Reforming of Cy hydrocarbons. 

Silver Azide, Cadmium Azide, Cupric Azide, Triazidotrinitrobenzene, Chloratotrimercuraldehyde, Nitrogen Sulfide Hexamethylenetriper oxide diamine Until WWI, Mercuric Fulminate was the principle initiating agent used, but Lead Azide has now replaced it. Lead azide is not the most powerful azide, but is more stable and less dangerous to handle than some of the other ones. Cadmium Azide, for example, is more powerful than Lead Azide but is unsuitable as an initiating agent because it is difficult to prepare and is soluble in Wdtci... 

---