Networks from addition polymerization

The addition polymerization of diisocyanates with macroglycols to produce urethane polymers was pioneered in 1937 (1). The rapid formation of high molecular weight urethane polymers from Hquid monomers, which occurs even at ambient temperature, is a unique feature of the polyaddition process, yielding products that range from cross-linked networks to linear fibers and elastomers. The enormous versatility of the polyaddition process allowed the manufacture of a myriad of products for a wide variety of appHcations. 

Figure 1. The synthesis of sequential IPN above and simultaneous interpenetrating networks, SIN, below. For the synthesis of SIN, two different reactions operate simultaneously such as condensation polymerization and addition polymerization. Reproduced with permission from Ref. 23. Copyright 1981, Plenum Publishing.

We synthesized [13] IPNs composed of polyethylene oxide) (PEO) (polymer A) and poly(N-acryloylpyrrolidine) (PAPy) (polymer B). The IPN was synthesized by simultaneous crosslinked polymerization of APy and PEO. The overall reaction scheme for IPN synthesis by radical polymerization for APy (polymer A) and addition polymerization for PEO (polymer B) is shown in Fig. 3. This pair shows simple coacervation behavior in water. The IPN is constructed from PEO and PAPy networks as shown in Fig. 4. Chemically independent networks of polymer A and polymer B are interlocked and macroscopic phase separation in water swollen states is avoided. 

The reversibility of supramolecular polymers adds new aspects to many of the principles that are known from condensation polymerizations. A mixture of different supramolecular monomers, for example, will yield copolymers, but it is extremely simple to adjust the copolymer composition instantaneously by adding an additional monomer. Moreover, the use of monomers with a functionality of three or more, will give rise to a network formation. However, in contrast to condensation networks, the self-healing supramolecular network can reassemble to form the thermodynamically most favorable state, thus forming denser networks.121... 

Figure 1.27. A schematic diagram of a network crosslinked by addition polymerization showing regions of high crosslink density (mierogel particles, arrowed) in regions of resin of lower crosslink density. Chains from the latter region that conneet gel partieles are also shown. Adapted from Pascualt et al. (2002).

Post-polymerization functionalization has also been applied to the synthesis of terpyridine-modified polymers [ 126]. In a recent approach, Schubert and colleagues employed this method to prepare poly(pentafluorostyrene) with terpyridines in the side chains [127]. First, poly(pentafluorostyrene) with a narrow polydispersity index of just 1.08 was synthesized by nitroxide-mediated polymerization. In a second step, this polymer was converted with amine-functionalized terpyridine under microwave heating, selectively substituting the para-fluorines. Addition of iron(II) sulfate to a solution of the terpyridine-functionalized polymer in a mixture of chloroform and methanol leads to gelation at a polymer concentration of 33 g In another work, Schubert and coworkers prepared metal-cross-Iinked polymer networks from linear and tri-arm PEG precursors, both functionalized with terpyridine at their OH-termini [128]. Quantitative functionalization of these precursors was achieved by conversion of the hydroxy-functionalized PEG derivatives with 4-chloro-2,2 6, 2"-terpyridine under basic conditions. However, quantitative cross-linking with iron(II) chloride was not observed in methanol solutions, neither at room temperature nor at elevated temperature, but only a small quantity of cross-linked material precipitated from the solution. This observation was attributed to a strong tendency of the tri-arm PEG to form intramolecular complexes, acting as a chain stopper rather than as a cross-linker. 

Composites having electrical conductivities up to about 5 Scm" can be synthesized starting from porous cross-linked polystyrene imbibed with a bithiophene solution after partial drying of the saturated host polymer imbibing with a FeCla solution PT is produced by oxidative polymerization, and the PT network is additionally doped by FeCls [25, 48]. 

---