National Semiconductor

National Semiconductor, 2006, Discussion Forum response, http //wwwd.national.com/national/PowerMB.nsf/... 

National Semiconductor LM-35 temperature sensor with a category 5 connector... 

Sensors were inserted in the prototype to monitor the temperature (National Semiconductors, LM35-DZ), humidity (Honeywell, HIH-3605-B) and total VOC concentration (FIS, SP3-AQ2) at various locations shown in Fig. 12.8-10. The data were collected by a data logger (Picolog, ADC-16) and analyzed. The temperature profiles from the preliminary test showed that poor seal between the hot and cool air streams compromised the prototype performance. Hot spots and uncontrollable temperature rise prevented further tests. This clearly showed that the complicated design is not suitable. 

Kielkowski, Ron M. 1994. Inside Spice. New York McGraw-Hill-National Semiconductor. 1994. Linear Applications Handbook. 

KONSTANTIN SMEKALIN AND QING-TANG JIANG, Sematech Inc., 2706 Montoplis Dr., Austin, TX 78741, and National Semiconductor Inc., 2900 Semiconductor Dr., Santa Clara, CA 95052. 

SEMATECH, 2706 Montopolis Drive, Austin, Texas, 78741-6499 National Semiconductor Corp., 2900 Semiconductor Drive, M/S E-lOO, Santa Clara, CA 95051 Philips Analytical Systems, 12 Michigan Drive, Natick, MA 01760 crosystems Technology Laboratories, EECS Department, MIT, 60 Vassar Street, Room 39-567B, Cambridge, MA 02139 IPEC Corporation, 4717 East Hilton Ave, Phoenix AZ, 85034 T. West, W. Sands, Thomas West Inc. 470 Mercury Drive, Sunnyvale, CA, 94086. 

Figure 2.6. SEM images of 0.8-p.m lines and spaces printed with (right) and without (left) contrast-enhancement lithography. (Courtesy of Cliff Takemoto of National Semiconductor.)...

April 25, 2002, National Semiconductor Corporation Seminar Presentation Bloom Associates Inc., CA-94903... 

Among the technical people who reviewed major parts of this book before publication, and helped me improve it a lot is Harry Holt, a very bright senior engineer from National Semiconductor. Harry s eagle eye and absolutely frank technical feedback saved the day for me several times. 

Repassivation and deposition of solder bumps Eliminates need for underfill, standard SMT processes, smallest footprint per I/O with space savings on PWB M/croSMD, standard and thin versions (National Semiconductor) N/A... 

M.W. Poulter, National Semiconductor Inc., Santa Clara, California, USA, 2000 (Private Communication). 

The first commercially successful integrated operational amplifier (op-amp) was the Fairchild Company s /uA702, which was available in 1963. The first practical integrated op-amp was the A709, which was available in 1965. National Semiconductor Company s LMlOl followed soon after. These three op-amps were designed by Bob Widlar Electronic Design, 1992). 

National Semiconductor. 1989. National Semiconductor Data Acquisition Linear Devices Data Book. National Semiconductor Corp., Santa Clara, CA... 

FIGURE 10.35 Available regulator package styles. (Source Courtesy of National Semiconductor.)... 

National Semiconductor. 1995. National Power IC s Databook, 1995 ed., pp. xxvii, 2-177. 

---