Multiple cutting speed

They allow a reduction of machining time compared to steel through multiple cutting speeds. The higher speeds provide better performance in addition to better surfaces. 

The multiple regression analysis was performed for constructing the RSM-based burr size mathematical models. In the present investigation, the second order burr height and burr thickness mathematical models have been developed in terms of four process parameters, namely, cutting speed (v) feed rate (/), drill diameter (d) and point angle (. The nonlinear second order response surface equation is given by ... 

For large systems comprising 36,000 atoms FAMUSAMM performs four times faster than SAMM and as fast as a cut-off scheme with a 10 A cut-off distance while completely avoiding truncation artifacts. Here, the speed-up with respect to SAMM is essentially achieved by the multiple-time-step extrapolation of local Taylor expansions in the outer distance classes. For this system FAMUSAMM executes by a factor of 60 faster than explicit evaluation of the Coulomb sum. The subsequent Section describes, as a sample application of FAMUSAMM, the study of a ligand-receptor unbinding process. 

The two principal elements of evaporator control are evaporation rate a.ndproduct concentration. Evaporation rate in single- and multiple-effect evaporators is usually achieved by steam-flow control. Conventional-control instrumentation is used (see Sec. 22), with the added precaution that pressure drop across meter and control valve, which reduces temperature difference available for heat transfer, not be excessive when maximum capacity is desired. Capacity control of thermocompression evaporators depends on the type of compressor positive-displacement compressors can utilize speed control or variations in operating pressure level. Centrifugal machines normally utihze adjustable inlet-guide vanes. Steam jets may have an adjustable spindle in the high-pressure orifice or be arranged as multiple jets that can individually be cut out of the system. 

---