Mooney jumping

As the polymer molecules form and dissociate from the catalyst, they remain ia solution. The viscosity of the solution increases with increasing polymer concentration. The practical upper limit of solution viscosity is dictated by considerations of heat transfer, mass transfer, and fluid flow. At a mbber soflds concentration of 8—10%, a further increase in the solution viscosity becomes impractical, and the polymerisation is stopped hy killing the catalyst. This is usually done by vigorously stirring the solution with water. If this is not done quickly, the unkilled catalyst continues to react, leading to uncontrolled side reactions, resulting in an increase in Mooney viscosity called Mooney Jumping. 

Reference without Mooney jump with PCI3 Mooney jump... 

GAP-DEPENDENT APPARENT SHEAR RATE. Indirect evidence of slip, as well as a measurement of its magnitude, can be extracted from the flow curve (shear stress versus shear rate) measured at different rheometer gaps (Mooney 1931). If slip occurs, one expects the slip velocity V (a) to depend on the shear stress a, but not on the gap h. Thus, if a fluid is sheared in a plane Couette device with one plate moving and one stationary, and the gap h is varied with the shear stress a held fixed, there will be a velocity jump of magnitude Vs(ct) at the interfaces between the fluid and each of the two plates. There will also be a velocity gradient >(a) in the bulk of the fluid thus the velocity of the moving surface will be y = 2V,(a) + y (a)/i. The apparent shear rate V/h will therefore be... 

---